You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
David Bauer 300b7fe85a ipq40xx: add support for Aruba AP-365
Hardware
--------
SoC:   Qualcomm IPQ4029
RAM:   512M DDR3
FLASH: - 128MB NAND (Macronix MX30LF1G18AC)
       - 4MB SPI-NOR (Macronix MX25R3235F)
TPM:   Atmel AT97SC3203
BLE:   Texas Instruments CC2540T
       attached to ttyMSM0
ETH:   Atheros AR8035
LED:   System (red / green / amber)
BTN:   Reset

The USB port on the device is (in contrast to other Aruba boards) real
USB. The AP uses a CP2101 USB TTY converter on the board.

Console baudrate is 9600 8n1.

To enable a full list of commands in the U-Boot "help" command, execute
the literal "diag" command.

Installation
------------

1. Get the OpenWrt initramfs image. Rename it to ipq40xx.ari and put it
   into the TFTP server root directory. Configure the TFTP server to
   be reachable at 192.168.1.75/24. Connect the machine running the TFTP
   server to the ethernet port of the access point.

2. Connect to the serial console. Interrupt autobooting by pressing
   Enter when prompted.

3. Configure the bootargs and bootcmd for OpenWrt.
   $ setenv bootargs_openwrt "setenv bootargs console=ttyMSM1,9600n8"
   $ setenv nandboot_openwrt "run bootargs_openwrt; ubi part aos1;
     ubi read 0x85000000 kernel; bootm 0x85000000"
   $ setenv ramboot_openwrt "run bootargs_openwrt;
     setenv ipaddr 192.168.1.105; setenv serverip 192.168.1.75;
     netget; set fdt_high 0x87000000; bootm"
   $ setenv bootcmd "run nandboot_openwrt"
   $ saveenv

4. Load OpenWrt into RAM:
   $ run ramboot_openwrt

5. After OpenWrt booted, transfer the OpenWrt sysupgrade image to the
   /tmp folder on the device.

6. Flash OpenWrt:
   Make sure you use the mtd partition with the label "ubi" here!

   $ ubidetach -p /dev/mtd1
   $ ubiformat /dev/mtd1
   $ sysupgrade -n /tmp/openwrt-sysupgrade.bin

To go back to the stock firmware, simply reset the bootcmd in the
bootloader to the original value:

  $ setenv bootcmd "boot"
  $ saveenv

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years ago
..
qcom-ipq4018-a42.dts ipq40xx: dts: Unify naming of gpio-led nodes 6 years ago
qcom-ipq4018-ap120c-ac.dts ipq40xx: add ath10k-calibration-variant in AP120C-AC DTS 5 years ago
qcom-ipq4018-cs-w3-wd1200g-eup.dts ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP 5 years ago
qcom-ipq4018-dap-2610.dts ipq40xx: Add support for D-Link DAP-2610 5 years ago
qcom-ipq4018-ea6350v3.dts ipq40xx: ea6350v3: 4.19: enable pseudo rng support 5 years ago
qcom-ipq4018-eap1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 6 years ago
qcom-ipq4018-emd1.dts ipq40xx: add support for EnGenius EMD1 5 years ago
qcom-ipq4018-ens620ext.dts ipq40xx: Fix reboot on EnGenius ENS620EXT 5 years ago
qcom-ipq4018-ex61x0v2.dtsi ipq40xx: add label MAC address for Netgear EX6100v2/EX6150v2 5 years ago
qcom-ipq4018-ex6100v2.dts ipq40xx: remove qcom,ipq4019 on all devices 6 years ago
qcom-ipq4018-ex6150v2.dts ipq40xx: remove qcom,ipq4019 on all devices 6 years ago
qcom-ipq4018-fritzbox-4040.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4018-jalapeno.dts ipq40xx: use DTSI for Jalapeno 5 years ago
qcom-ipq4018-jalapeno.dtsi ipq40xx: use DTSI for Jalapeno 5 years ago
qcom-ipq4018-meshpoint-one.dts ipq40xx: add support for Crisis Innovation Lab MeshPoint.One 5 years ago
qcom-ipq4018-nbg6617.dts ipq40xx: convert to device-tree based USB LED trigger 6 years ago
qcom-ipq4018-rt-ac58u.dts ipq40xx: fix usbport trigger on the RT-AC58U with USB 2.0 devices 5 years ago
qcom-ipq4018-wre6606.dts ipq40xx: dts: Unify naming of gpio-led nodes 6 years ago
qcom-ipq4019-a62.dts ipq40xx: 4.19: fix pcie wifi unit-address of the MR33 and A62 6 years ago
qcom-ipq4019-ap.dk04.1-c1.dts ipq40xx: Add files for 4.19 6 years ago
qcom-ipq4019-ap.dk04.1.dtsi ipq40xx: 4.19: Enable pseudo random number generator 6 years ago
qcom-ipq4019-cm520-79f.dts ipq40xx: add support for MobiPromo CM520-79F 4 years ago
qcom-ipq4019-e2600ac-c1.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-e2600ac-c2.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-e2600ac.dtsi ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-ea8300.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-eap2200.dts ipq40xx: fix support of EnGenius EAP2200 4 years ago
qcom-ipq4019-fritzbox-7530.dts ipq40xx: fix FRITZBox 7530 NAND controller node 5 years ago
qcom-ipq4019-fritzrepeater-1200.dts ipq40xx: add support for AVM FRITZ!Repeater 1200 5 years ago
qcom-ipq4019-fritzrepeater-3000.dts ipq40xx: add support for AVM FRITZ!Repeater 3000 5 years ago
qcom-ipq4019-habanero-dvk.dts ipq40xx: add support for 8devices Habanero DVK 4 years ago
qcom-ipq4019-map-ac2200.dts ipq40xx: limit frequencies for Asus Lyra 5 years ago
qcom-ipq4019-rtl30vw.dts ipq40xx: add support for Cell C RTL30VW 4 years ago
qcom-ipq4019-u4019-32m.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-u4019.dtsi ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-wpj419.dts ipq40xx: fix misplaced cells-sizes in WPJ419's dts 5 years ago
qcom-ipq4028-wpj428.dts ipq40xx: wpj428: fix missing MDIO GPIO reset and pinmux 4 years ago
qcom-ipq4029-ap-303.dts ipq40xx: add support for Aruba AP-365 4 years ago
qcom-ipq4029-ap-303h.dts ipq40xx: add support for Aruba AP-303H 5 years ago
qcom-ipq4029-ap-365.dts ipq40xx: add support for Aruba AP-365 4 years ago
qcom-ipq4029-aruba-glenmorangie.dtsi ipq40xx: add support for Aruba AP-365 4 years ago
qcom-ipq4029-gl-b1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 6 years ago
qcom-ipq4029-mr33.dts ipq40xx: 4.19: fix pcie wifi unit-address of the MR33 and A62 6 years ago