openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Christopher Hill fa70b3a4bb ath79: add Mikrotik rb4xx series drivers This adds 3 Mikrotik rb4xx series drivers as follows: rb4xx-cpld: This is in the mfd subsystem, and is the parent CPLD device that interfaces between the SoC SPI bus and its two children below. rb4xx-gpio: This is the GPIO expander. rb4xx-nand: This is the NAND driver. The history of this code comes in three phases. 1. The first is a May 2015 attempt to push the equivalient ar71xx rb4xx drivers upstream. See https://lore.kernel.org/patchwork/patch/940880/. Module-author: Gabor Juhos <juhosg@openwrt.org> Module-author: Imre Kaloz <kaloz@openwrt.org> Module-author: Bert Vermeulen <bert@biot.com> 2. Next several ar71xx patches were applied bringing the code current. commit `7bbf4117c6` Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> commit `af79fdbe4a` commit `889272d92d` commit `e21cb649a2` commit `7c09fa4a74` Signed-off-by: Felix Fietkau <nbd@nbd.name> 3. Finally a heavy refactor to split the driver into the three new subsystems, and updated to work with the device tree configuration, plus updates and review feedback incorporated Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Signed-off-by: Christopher Hill <ch6574@gmail.com>		4 years ago
.github	build: Update README & github help	6 years ago
config	build: refactor JSON info files to `profiles.json`	4 years ago
include	kernel: bump 5.4 to 5.4.45	4 years ago
package	kirkwood: move mmc/sd features to modules	4 years ago
scripts	scripts: config: remove accidentally added file	4 years ago
target	ath79: add Mikrotik rb4xx series drivers	4 years ago
toolchain	musl: use official release tar	4 years ago
tools	mkchkimg: use higher version code	4 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	Revert ".gitignore: ignore more scripts/config output"	4 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	merge: base: update base-files and basic config	7 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: refactor JSON info files to `profiles.json`	4 years ago
README	build: switch to Python 3	5 years ago
feeds.conf.default	feeds: switch git.lede-project.org URLs to git.openwrt.org	6 years ago
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org