You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
386 lines
6.8 KiB
Plaintext
386 lines
6.8 KiB
Plaintext
// SPDX-License-Identifier: ISC
|
|
// Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
|
|
// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Cell C RTL30VW";
|
|
compatible = "cellc,rtl30vw";
|
|
|
|
aliases {
|
|
led-boot = &led_power_blue;
|
|
led-failsafe = &led_power_red;
|
|
led-running = &led_power_blue;
|
|
led-upgrade = &led_power_red;
|
|
};
|
|
|
|
chosen {
|
|
bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
|
|
};
|
|
|
|
led_spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
num-chipselects = <1>;
|
|
|
|
mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
|
|
cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
|
sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
|
|
|
|
led_gpio: led_gpio@0 {
|
|
compatible = "fairchild,74hc595";
|
|
reg = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
registers-number = <2>;
|
|
spi-max-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power_blue: power_blue {
|
|
gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:power";
|
|
default-state = "on";
|
|
};
|
|
|
|
led_power_red: power_red {
|
|
gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:red:power";
|
|
};
|
|
|
|
tp28 {
|
|
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
|
|
label = "rtl30vw:ext:tp28";
|
|
default-state = "keep";
|
|
};
|
|
|
|
tp27 {
|
|
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
|
|
label = "rtl30vw:ext:tp27";
|
|
default-state = "keep";
|
|
};
|
|
|
|
wlan2g {
|
|
gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:wlan2g";
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
wlan5g {
|
|
gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:wlan5g";
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
wps {
|
|
gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:wps";
|
|
};
|
|
|
|
voip {
|
|
gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:voip";
|
|
};
|
|
|
|
s1 {
|
|
gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:s1";
|
|
};
|
|
|
|
s2 {
|
|
gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:s2";
|
|
};
|
|
|
|
s3 {
|
|
gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:s3";
|
|
};
|
|
|
|
s4 {
|
|
gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:blue:s4";
|
|
};
|
|
|
|
signal {
|
|
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
|
label = "rtl30vw:red:signal";
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
rng@22000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-psgmii@98000 {
|
|
status = "okay";
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
/* select hostmode */
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
status = "okay";
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
usb2@60f8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3@8af8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-switch@c000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
edma@c080000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
/*"n25q128a11" is required for proper nand recognition in u-boot. */
|
|
compatible = "jedec,spi-nor", "n25q128a11";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x40000 0x20000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "0:QSEE";
|
|
reg = <0x60000 0x60000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "0:CDT";
|
|
reg = <0xc0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@d0000 {
|
|
label = "0:DDRPARAMS";
|
|
reg = <0xd0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "0:APPSBLENV";
|
|
reg = <0xe0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "0:APPSBL";
|
|
reg = <0xf0000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
label = "0:ART";
|
|
reg = <0x170000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "0:BOOTCONFIG";
|
|
reg = <0x180000 0x10000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash@1 {
|
|
/*
|
|
* Factory U-boot looks in 0:BOOTCONFIG partition for active
|
|
* partitions settings and mangle partition config. So kernel
|
|
* /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
|
|
* It isn't a problem but we never can be sure where OFW put
|
|
* factory images. "spinand,mt29f" value is required for proper
|
|
* nand recognition in u-boot.
|
|
*/
|
|
compatible = "spi-nand","spinand,mt29f";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x0 0x400000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "rootfs";
|
|
reg = <0x400000 0x2000000>;
|
|
};
|
|
|
|
partition@2400000 {
|
|
label = "kernel_1";
|
|
reg = <0x2400000 0x400000>;
|
|
};
|
|
|
|
partition@2800000 {
|
|
label = "rootfs_1";
|
|
reg = <0x2800000 0x2000000>;
|
|
};
|
|
|
|
partition@4800000 {
|
|
label = "ubifs";
|
|
reg = <0x4800000 0x3800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio60", "gpio61";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pinmux {
|
|
function = "blsp_spi0";
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinmux_cs {
|
|
function = "gpio";
|
|
pins = "gpio54", "gpio59";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "cellc,rtl30vw";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "cellc,rtl30vw";
|
|
};
|