openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Gabor Juhos f7033929fa add menuconfig option for enabling debugfs support in the kernel SVN-Revision: 17540		15 years ago
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	15 years ago
include	add menuconfig option for enabling debugfs support in the kernel	15 years ago
package	move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well	15 years ago
scripts	scripts/feeds: fix an error message	15 years ago
target	ar71xx: the adm6996 phy driver does not work with the RouterStation, disable it until we find a better solution	15 years ago
toolchain	uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	15 years ago
tools	firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash	15 years ago
.gitignore	add logs/ to .gitignore	15 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	add menuconfig option for enabling debugfs support in the kernel	15 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	15 years ago
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	16 years ago
feeds.conf.default	switch to LuCI 0.9.x branch	15 years ago
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	15 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org