You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Sungbo Eo 763914ef1b ramips: improve netis WF-2881 support
This patch does the following:

1. remove u-boot-env partition
   Stock bootloader saves env variables at 0x80000 in flash,
   and there is nothing stored at 0x30000.
   By merging the partition "u-boot-env" with "u-boot",
   the partition table becomes the same as used in stock firmware:
   00000000-00080000: "Bootloader"
   00080000-00100000: "Config"
   00100000-00140000: "Factory"
   00140000-07f80000: "Kernel"

2. fix LAN/WAN MAC addresses and provide label MAC address
   Ethernet MAC addresses are stored in factory partition at:
   0xe000: LAN (label_mac)
   0xe006: WAN (label_mac+1)

3. fix LAN port order
   WF-2881 LAN ports are in reverse order of switch ports.

4. fix WiFi LEDs
   mt76 led nodes are added to make WiFi LEDs work.
   On top of this, mt76 node names are changed to more generic ones,
   and compatible strings are also added.

5. fix pinmux groups
   uart3 and uart2 pins are used as button and led, but jtag pins are not.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
5 years ago
..
base-files ramips: split base-files into subtargets 5 years ago
dts ramips: improve netis WF-2881 support 5 years ago
files-4.14/drivers ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random 5 years ago
image ramips: fix MTK_SOC for RT3662 devices 5 years ago
mt76x8 ramips: split base-files into subtargets 5 years ago
mt7620 ramips: add support for ZBT WE1026-H 5 years ago
mt7621 ramips: improve netis WF-2881 support 5 years ago
patches-4.14 kernel: bump 4.14 to 4.14.147 5 years ago
rt288x ramips: split base-files into subtargets 5 years ago
rt305x ramips: split base-files into subtargets 5 years ago
rt3883 ramips: split base-files into subtargets 5 years ago
Makefile ramips: switch to linux 4.14 6 years ago
modules.mk kernel: Fix kmod-regmap split 5 years ago