You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/package
David Bauer e959048c12 ramips: add support for RAVPower RP-WD009
The RAVPower RP-WD009 is a batter-powered pocket sized router with SD
card lot and USB port.

Hardware
--------
CPU:   MediaTek MT7628AN
RAM:   64M DDR2
FLASH: 16M GigaDevices SPI-NOR
WLAN:  MediaTek MT7628AN 2T2R b/g/n
       MediaTek MT7610E  1T1R n/ac
ETH:   1x FastEthernet
SD:    SD Card slot
USB:   USB 2.0

Custom PMIC on the I2C bus (address 0x0a).

Installation
------------

1. Press and hold down the reset button.

2. Power up the Device. Keep pressing the reset button for 10
   more seconds until the Globe LED lights up.

3. Attach your Computer to the Ethernet port. Assign yourself the
   address 10.10.10.1/24.

4. Access the recovery page at 10.10.10.128 and upload the OpenWrt
   factory image.

5. The flashing will take around 1 minute. The device will reboot
   automatically into OpenWrt.

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years ago
..
base-files base-files: coreutil-sha256sum breaks status code 4 years ago
boot ramips: add support for RAVPower RP-WD009 4 years ago
devel kernel: fix portability issue with perf on linux 5.4 4 years ago
firmware ipq40xx: add support for EnGenius EMR3500 4 years ago
kernel kernel: i2c-pxa: remove slave 4 years ago
libs libnetfilter-queue: fix package title and description 4 years ago
network netifd: replace timesvr with timesrv 4 years ago
system ubox: add ALTERNATIVES 4 years ago
utils logger: enable alternatives support 4 years ago
Makefile packages: apply usign padding workarounds to package indexes if needed 5 years ago