dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
36,166 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'e7be0decf6'
${ noResults }
Go to file
Martin Blumenstingl e7be0decf6 ar71xx: Do not use a hardcoded ath10k firmware mac address 
ar71xx has an init-script for special devices where the ath10k OTP
calibration data is stored on the PCIe card's EEPROM (and thus can only
be read by ath10k). Unfortunately the OTP data uses the default mac
address (= all devices come with the same mac address, which leads to
problems when you have multiple of these devices in the same network).

To work around this the mac address is patched in the firmware during
the first boot of the device. To prevent flash wear this was only done
if the ath10k firmware matched a hardcoded md5sum.
However, if the md5sum does not match this can mean that either the mac
address was already patched (which is fine) - unfortunately it can also
mean that the firmware version was updated without updating the
hardcoded md5sum.

Change the "was the mac address already patched" check to actually
compare the mac address inside the ath10k firmware.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 		8 years ago
.github Add Issue submission template (redirect to bugs.lede-project.org) 8 years ago
config config: enable shadow passwords unconditionally 8 years ago
docs build: Prevent more gzip timestamps 9 years ago
include rootfs: fail on errors in postinst scripts 8 years ago
package ath10k-firmware: update the qca988x firmware to 10.2.4.70.54 8 years ago
scripts image: allow specifying additional packages for device-specific rootfs 8 years ago
target ar71xx: Do not use a hardcoded ath10k firmware mac address 8 years ago
toolchain fortify-headers: update to 0.8 8 years ago
tools ptgen: work around gcc miscompilation 8 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore build: add integration for managing opkg package feed keys 9 years ago
BSDmakefile add missing copyright header 18 years ago
Config.in branding: add LEDE branding 8 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile build: move merged package directory from bin/ to staging_dir 8 years ago
README README: Update project README 8 years ago
feeds.conf.default feeds: switch from github to lede-project.org mirrors 8 years ago
rules.mk build: add checksum target 8 years ago

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org