You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
575 lines
14 KiB
Diff
575 lines
14 KiB
Diff
From 794b9e55c77bf0ef34dfdb3b151a845c004b3ce3 Mon Sep 17 00:00:00 2001
|
|
From: Li Yang <leoyang.li@nxp.com>
|
|
Date: Thu, 2 May 2019 16:01:01 -0500
|
|
Subject: [PATCH] arm64: dts: ls1043a: accumulated change for ls1043a boards
|
|
|
|
commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
|
|
Author: Peng Ma <peng.ma@nxp.com>
|
|
Date: Wed Jul 25 08:53:07 2018 +0000
|
|
|
|
dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
|
|
support
|
|
|
|
add block-offset to support different virtual block offset for qdma
|
|
base on soc;
|
|
the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
|
|
block,N based on block number of qdma;
|
|
|
|
Signed-off-by: Peng Ma <peng.ma@nxp.com>
|
|
|
|
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Date: Mon Apr 2 16:22:40 2018 +0800
|
|
|
|
arm64: dts: ls1043a: add dts entry for A-010650
|
|
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
|
|
commit a47e4bd0b5d076feb6d81601c16d5b79e53a92c8
|
|
Author: Rajesh Bhagat <rajesh.bhagat@freescale.com>
|
|
Date: Wed Jan 27 11:37:25 2016 +0530
|
|
|
|
arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
|
|
|
|
Add "configure-gfladj" boolean property to USB3 node. This property
|
|
is used to determine whether frame length adjustent is required
|
|
or not
|
|
|
|
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
|
|
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
|
|
commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
|
|
Author: Changming Huang <jerry.huang@nxp.com>
|
|
Date: Wed Apr 19 12:49:50 2017 +0800
|
|
|
|
arm/arm64: dts: Add property snps incr burst type adjustment for
|
|
INCR burst type for dwc3
|
|
|
|
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
|
|
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
|
|
commit 8632d84e0fe187aa023a24f0dad0040c53e12450
|
|
Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
|
|
Date: Thu Jan 25 11:31:13 2018 +0530
|
|
|
|
arm64: dts: freescale: ls1043a: Modify DT nodes for qspi
|
|
|
|
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
|
|
|
|
commit b1dc1ebed79e9aaab75fd06837d794ec2f1b624d
|
|
Author: Ran Wang <ran.wang_1@nxp.com>
|
|
Date: Fri Jan 5 15:14:48 2018 +0800
|
|
|
|
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
|
|
|
|
Enable USB3 HW LPM feature for ls1043a and active patch for
|
|
snps erratum A-010131. It will disable U1/U2 temperary when
|
|
initiate U3 request.
|
|
|
|
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
|
|
|
|
commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
|
|
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Date: Tue Jun 13 13:14:26 2017 +0800
|
|
|
|
arm64: dts: correct the register range of dcfg
|
|
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
|
|
commit f60e39fd51ad702e3a2613faaca40871a4763735
|
|
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
Date: Tue Aug 22 18:04:02 2017 +0800
|
|
|
|
arm64: dts: ls1043a: add pcf85263 rtc nodes
|
|
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
|
|
commit 67c82e3c7b376139d7cee624589bedbc311f8868
|
|
Author: jiaheng.fan <jiaheng.fan@nxp.com>
|
|
Date: Thu May 11 17:36:33 2017 +0800
|
|
|
|
arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
|
|
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
|
|
|
|
commit c6d9c2498ee83669f9853100301edff9a5905caf
|
|
Author: Wang Dongsheng <dongsheng.wang@nxp.com>
|
|
Date: Fri Apr 21 13:26:07 2017 +0800
|
|
|
|
arm64: dts: ls1043a: add ftm0 nodes
|
|
|
|
Add rcpm and ftm0 nodes. The Power Management related features
|
|
need these nodes.
|
|
|
|
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
|
|
|
|
commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
|
|
Author: Po Liu <po.liu@nxp.com>
|
|
Date: Fri Sep 30 17:11:36 2016 +0800
|
|
|
|
arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
|
|
|
|
Some platforms(NXP Layerscape for example) aer/pme interrupts was
|
|
not
|
|
MSI/MSI-X/INTx but using interrupt line independently. This patch
|
|
add "aer", "pme" interrupt-names for aer/pme interrupt.
|
|
|
|
With the interrupt-names "aer", "pme" code could probe aer/pme
|
|
interrupt
|
|
line for pcie root port, replace the aer/pme interrupt service irqs.
|
|
|
|
This is intend to fixup the Layerscape platforms which aer/pmes
|
|
interrupts
|
|
was not MSI/MSI-X/INTx, but using interrupt line independently.
|
|
|
|
Since the interrupt-names "intr" never been used. Remove it.
|
|
|
|
Signed-off-by: Po Liu <po.liu@nxp.com>
|
|
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
|
|
|
|
commit 4d20ecf029f1255520b30c103e1724c618b981c7
|
|
Author: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Date: Sun Jun 12 15:51:44 2016 +0800
|
|
|
|
arm64: dts: ls1043ardb: add ds26522 node
|
|
|
|
add ds26522 node to fsl-ls1043a-rdb.dts
|
|
|
|
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
|
|
commit ca470562646ab058814fc4a1195016fb3266cdf5
|
|
Author: Zhao Qiang <qiang.zhao@nxp.com>
|
|
Date: Sun Jun 12 15:44:11 2016 +0800
|
|
|
|
arm64: dts: ls1043ardb: add qe node
|
|
|
|
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 162 ++++++++++++++++++++++
|
|
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 36 +++++
|
|
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 108 +++++++++++++--
|
|
3 files changed, 295 insertions(+), 11 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
|
|
@@ -24,6 +24,22 @@
|
|
serial1 = &duart1;
|
|
serial2 = &duart2;
|
|
serial3 = &duart3;
|
|
+ sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
|
|
+ sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
|
|
+ sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
|
|
+ sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
|
|
+ qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
|
|
+ qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
|
|
+ qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
|
|
+ qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
|
|
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
|
|
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
|
|
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
|
|
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
|
|
+ emi1_slot1 = &ls1043mdio_s1;
|
|
+ emi1_slot2 = &ls1043mdio_s2;
|
|
+ emi1_slot3 = &ls1043mdio_s3;
|
|
+ emi1_slot4 = &ls1043mdio_s4;
|
|
};
|
|
|
|
chosen {
|
|
@@ -64,6 +80,8 @@
|
|
fpga: board-control@2,0 {
|
|
compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
|
|
reg = <0x2 0x0 0x0000100>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
@@ -149,3 +167,147 @@
|
|
};
|
|
|
|
#include "fsl-ls1043-post.dtsi"
|
|
+
|
|
+&fman0 {
|
|
+ ethernet@e0000 {
|
|
+ phy-handle = <&qsgmii_phy_s2_p1>;
|
|
+ phy-connection-type = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@e2000 {
|
|
+ phy-handle = <&qsgmii_phy_s2_p2>;
|
|
+ phy-connection-type = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@e4000 {
|
|
+ phy-handle = <&rgmii_phy1>;
|
|
+ phy-connection-type = "rgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@e6000 {
|
|
+ phy-handle = <&rgmii_phy2>;
|
|
+ phy-connection-type = "rgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@e8000 {
|
|
+ phy-handle = <&qsgmii_phy_s2_p3>;
|
|
+ phy-connection-type = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@ea000 {
|
|
+ phy-handle = <&qsgmii_phy_s2_p4>;
|
|
+ phy-connection-type = "sgmii";
|
|
+ };
|
|
+
|
|
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
|
|
+ fixed-link = <1 1 10000 0 0>;
|
|
+ phy-connection-type = "xgmii";
|
|
+ };
|
|
+};
|
|
+
|
|
+&fpga {
|
|
+ mdio-mux-emi1 {
|
|
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
|
|
+ mdio-parent-bus = <&mdio0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x54 1>; /* BRDCFG4 */
|
|
+ mux-mask = <0xe0>; /* EMI1 */
|
|
+
|
|
+ /* On-board RGMII1 PHY */
|
|
+ ls1043mdio0: mdio@0 {
|
|
+ reg = <0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
|
|
+ reg = <0x1>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* On-board RGMII2 PHY */
|
|
+ ls1043mdio1: mdio@1 {
|
|
+ reg = <0x20>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
|
|
+ reg = <0x2>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* Slot 1 */
|
|
+ ls1043mdio_s1: mdio@2 {
|
|
+ reg = <0x40>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "disabled";
|
|
+
|
|
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
|
|
+ reg = <0x4>;
|
|
+ };
|
|
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
|
|
+ reg = <0x5>;
|
|
+ };
|
|
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
|
|
+ reg = <0x6>;
|
|
+ };
|
|
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
|
|
+ reg = <0x7>;
|
|
+ };
|
|
+
|
|
+ sgmii_phy_s1_p1: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* Slot 2 */
|
|
+ ls1043mdio_s2: mdio@3 {
|
|
+ reg = <0x60>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "disabled";
|
|
+
|
|
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
|
|
+ reg = <0x8>;
|
|
+ };
|
|
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
|
|
+ reg = <0x9>;
|
|
+ };
|
|
+ qsgmii_phy_s2_p3: ethernet-phy@a {
|
|
+ reg = <0xa>;
|
|
+ };
|
|
+ qsgmii_phy_s2_p4: ethernet-phy@b {
|
|
+ reg = <0xb>;
|
|
+ };
|
|
+
|
|
+ sgmii_phy_s2_p1: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* Slot 3 */
|
|
+ ls1043mdio_s3: mdio@4 {
|
|
+ reg = <0x80>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "disabled";
|
|
+
|
|
+ sgmii_phy_s3_p1: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ /* Slot 4 */
|
|
+ ls1043mdio_s4: mdio@5 {
|
|
+ reg = <0xa0>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "disabled";
|
|
+
|
|
+ sgmii_phy_s4_p1: ethernet-phy@1c {
|
|
+ reg = <0x1c>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
|
|
@@ -49,6 +49,10 @@
|
|
compatible = "pericom,pt7c4338";
|
|
reg = <0x68>;
|
|
};
|
|
+ rtc@51 {
|
|
+ compatible = "nxp,pcf85263";
|
|
+ reg = <0x51>;
|
|
+ };
|
|
};
|
|
|
|
&ifc {
|
|
@@ -94,6 +98,38 @@
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>; /* input clock */
|
|
};
|
|
+
|
|
+ slic@2 {
|
|
+ compatible = "maxim,ds26522";
|
|
+ reg = <2>;
|
|
+ spi-max-frequency = <2000000>;
|
|
+ fsl,spi-cs-sck-delay = <100>;
|
|
+ fsl,spi-sck-cs-delay = <50>;
|
|
+ };
|
|
+
|
|
+ slic@3 {
|
|
+ compatible = "maxim,ds26522";
|
|
+ reg = <3>;
|
|
+ spi-max-frequency = <2000000>;
|
|
+ fsl,spi-cs-sck-delay = <100>;
|
|
+ fsl,spi-sck-cs-delay = <50>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&uqe {
|
|
+ ucc_hdlc: ucc@2000 {
|
|
+ compatible = "fsl,ucc-hdlc";
|
|
+ rx-clock-name = "clk8";
|
|
+ tx-clock-name = "clk9";
|
|
+ fsl,rx-sync-clock = "rsync_pin";
|
|
+ fsl,tx-sync-clock = "tsync_pin";
|
|
+ fsl,tx-timeslot-mask = <0xfffffffe>;
|
|
+ fsl,rx-timeslot-mask = <0xfffffffe>;
|
|
+ fsl,tdm-framer-type = "e1";
|
|
+ fsl,tdm-id = <0>;
|
|
+ fsl,siram-entry-id = <0>;
|
|
+ fsl,tdm-interface;
|
|
+ };
|
|
};
|
|
|
|
&duart0 {
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
@@ -277,7 +277,7 @@
|
|
|
|
dcfg: dcfg@1ee0000 {
|
|
compatible = "fsl,ls1043a-dcfg", "syscon";
|
|
- reg = <0x0 0x1ee0000 0x0 0x10000>;
|
|
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
|
|
big-endian;
|
|
};
|
|
|
|
@@ -411,7 +411,7 @@
|
|
};
|
|
|
|
i2c0: i2c@2180000 {
|
|
- compatible = "fsl,vf610-i2c";
|
|
+ compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2180000 0x0 0x10000>;
|
|
@@ -421,6 +421,7 @@
|
|
dmas = <&edma0 1 39>,
|
|
<&edma0 1 38>;
|
|
dma-names = "tx", "rx";
|
|
+ scl-gpios = <&gpio4 12 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
@@ -525,6 +526,72 @@
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
+ uqe: uqe@2400000 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ device_type = "qe";
|
|
+ compatible = "fsl,qe", "simple-bus";
|
|
+ ranges = <0x0 0x0 0x2400000 0x40000>;
|
|
+ reg = <0x0 0x2400000 0x0 0x480>;
|
|
+ brg-frequency = <100000000>;
|
|
+ bus-frequency = <200000000>;
|
|
+
|
|
+ fsl,qe-num-riscs = <1>;
|
|
+ fsl,qe-num-snums = <28>;
|
|
+
|
|
+ qeic: qeic@80 {
|
|
+ compatible = "fsl,qe-ic";
|
|
+ reg = <0x80 0x80>;
|
|
+ #address-cells = <0>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupts = <0 77 0x04 0 77 0x04>;
|
|
+ };
|
|
+
|
|
+ si1: si@700 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ compatible = "fsl,ls1043-qe-si",
|
|
+ "fsl,t1040-qe-si";
|
|
+ reg = <0x700 0x80>;
|
|
+ };
|
|
+
|
|
+ siram1: siram@1000 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "fsl,ls1043-qe-siram",
|
|
+ "fsl,t1040-qe-siram";
|
|
+ reg = <0x1000 0x800>;
|
|
+ };
|
|
+
|
|
+ ucc@2000 {
|
|
+ cell-index = <1>;
|
|
+ reg = <0x2000 0x200>;
|
|
+ interrupts = <32>;
|
|
+ interrupt-parent = <&qeic>;
|
|
+ };
|
|
+
|
|
+ ucc@2200 {
|
|
+ cell-index = <3>;
|
|
+ reg = <0x2200 0x200>;
|
|
+ interrupts = <34>;
|
|
+ interrupt-parent = <&qeic>;
|
|
+ };
|
|
+
|
|
+ muram@10000 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
+ ranges = <0x0 0x10000 0x6000>;
|
|
+
|
|
+ data-only@0 {
|
|
+ compatible = "fsl,qe-muram-data",
|
|
+ "fsl,cpm-muram-data";
|
|
+ reg = <0x0 0x6000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
lpuart0: serial@2950000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2950000 0x0 0x1000>;
|
|
@@ -579,6 +646,16 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ ftm0: ftm0@29d0000 {
|
|
+ compatible = "fsl,ftm-alarm";
|
|
+ reg = <0x0 0x29d0000 0x0 0x10000>,
|
|
+ <0x0 0x1ee2140 0x0 0x4>;
|
|
+ reg-names = "ftm", "FlexTimer1";
|
|
+ interrupts = <0 86 0x4>;
|
|
+ big-endian;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
wdog0: wdog@2ad0000 {
|
|
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
|
|
reg = <0x0 0x2ad0000 0x0 0x10000>;
|
|
@@ -611,7 +688,10 @@
|
|
dr_mode = "host";
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,dis_rxdet_inp3_quirk;
|
|
+ usb3-lpm-capable;
|
|
+ snps,dis-u1u2-when-u3-quirk;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
+ configure-gfladj;
|
|
};
|
|
|
|
usb1: usb3@3000000 {
|
|
@@ -621,7 +701,10 @@
|
|
dr_mode = "host";
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,dis_rxdet_inp3_quirk;
|
|
+ usb3-lpm-capable;
|
|
+ snps,dis-u1u2-when-u3-quirk;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
+ configure-gfladj;
|
|
};
|
|
|
|
usb2: usb3@3100000 {
|
|
@@ -631,7 +714,10 @@
|
|
dr_mode = "host";
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,dis_rxdet_inp3_quirk;
|
|
+ usb3-lpm-capable;
|
|
+ snps,dis-u1u2-when-u3-quirk;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
+ configure-gfladj;
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
@@ -670,9 +756,9 @@
|
|
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
|
|
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
- interrupts = <0 118 0x4>, /* controller interrupt */
|
|
- <0 117 0x4>; /* PME interrupt */
|
|
- interrupt-names = "intr", "pme";
|
|
+ interrupts = <0 117 0x4>, /* PME interrupt */
|
|
+ <0 118 0x4>; /* aer interrupt */
|
|
+ interrupt-names = "pme", "aer";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
@@ -696,9 +782,9 @@
|
|
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
|
|
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
- interrupts = <0 128 0x4>,
|
|
- <0 127 0x4>;
|
|
- interrupt-names = "intr", "pme";
|
|
+ interrupts = <0 127 0x4>,
|
|
+ <0 128 0x4>;
|
|
+ interrupt-names = "pme", "aer";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
@@ -722,9 +808,9 @@
|
|
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
|
|
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
- interrupts = <0 162 0x4>,
|
|
- <0 161 0x4>;
|
|
- interrupt-names = "intr", "pme";
|
|
+ interrupts = <0 161 0x4>,
|
|
+ <0 162 0x4>;
|
|
+ interrupt-names = "pme", "aer";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|