You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Robert Marko 99f6f2c0b8 ar71xx: Add support for TP-Link CPE210 v3
Looks identical to the v2.

This PR adds support for a popular low-cost 2.4GHz N based AP

Specifications:
 - SoC: Qualcomm Atheros QCA9533 (650MHz)
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz N based built into SoC 2x2
 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
..
lzma-loader ar71xx: lzma-loader: constify kernel argv array 6 years ago
Makefile ar71xx: Move some targets to tiny 6 years ago
common-tp-link.mk ar71xx: factor out safe loader image build code 6 years ago
generic-legacy-devices.mk mac80211: make ath10k-ct the default ath10k 6 years ago
generic-tp-link.mk ar71xx: Add support for TP-Link CPE210 v3 5 years ago
generic-ubnt.mk ar71xx: add rssileds for xw devices 5 years ago
generic.mk build: move seama commands to image-commands.mk 6 years ago
legacy.mk ar71xx: Move F9K1115v2 under ar71xx tiny target 6 years ago
mikrotik.mk ar71xx: add support for MikroTik RouterBOARD 922UAGS-5HPacD 5 years ago
nand.mk mac80211: make ath10k-ct the default ath10k 6 years ago
tiny-legacy-devices.mk mac80211: make ath10k-ct the default ath10k 6 years ago
tiny-senao.mk ar71xx: move OCEDO Koala to generic and use dynamic partitioning 6 years ago
tiny-tp-link.mk Add support for TL-WA801ND v4 6 years ago
tiny.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 6 years ago
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 10 years ago
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 10 years ago