dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
40,954 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'd13b05741a'
${ noResults }
Go to file
Peter Lundkvist d13b05741a ramips: add support for TP-Link TL-WR902AC v3 
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.

Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet

* MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment.
  Therefore 5Ghz won' work.

Flash instruction:

The only way to flash LEDE image in TL-WR902AC v3 is to use
tftp recovery mode in U-Boot:

1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin"
   to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with the LAN port, press the reset button, power up
   the router and keep button pressed for around 6-7 seconds, until
   device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.

Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>
[drop p2led_an pinmux, this pin isn't used as gpio, fix whitespace issues]
Signed-off-by: Mathias Kresin <dev@kresin.me>
 		6 years ago
.github merge: github: use OpenWrt in issue/pr templates 6 years ago
config config: fix ARM64 dependency check 6 years ago
include kernel: bump 4.14 to 4.14.27 6 years ago
package firmware: add JBOOT based devices config extractor 6 years ago
scripts build: Allow to change the FIT config section name 6 years ago
target ramips: add support for TP-Link TL-WR902AC v3 6 years ago
toolchain glibc: update glibc to 2.26+ and switch to download from git 6 years ago
tools firmware-utils: add JBOOT bootloader image support 6 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore .gitignore: add .project & .cproject for eclipse users 6 years ago
BSDmakefile add missing copyright header 17 years ago
Config.in merge: base: update base-files and basic config 7 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile merge: base: update base-files and basic config 7 years ago
README merge: base: update base-files and basic config 7 years ago
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 6 years ago
rules.mk imagebuilder: reuse rootfs preparation from rootfs.mk 6 years ago

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org