openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT. While the disadvantage is less available flash space, it's easy and safe to flash without opening the device. Going back to the original firmware is also possible. This patch add two firmware utilities, mkbrncmdline and mkbrnboot. mkbrncmdline patches the uncompressed kernel so the registeres a0 to a3 are initialized and the memory size is passed in. mkbrnboot takes the lzma compressed kernel and squashfs images and creates a firmware image that can be flashed using the BRN-BOOT recovery kernel, which is booted by holding both buttons when powering up the device and will listen on http://192.168.2.1. The firmware file from bin/lantiq/ to use is openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage The BRN-BOOT recovery kernel does size-check the image, so if it's too big to fit into flash it will complain accordingly. A second patch is needed to make the wired network interface work since there is no u-boot to pre-initialise it. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 30532		13 years ago
docs	kamikaze has been released long ago	14 years ago
include	quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure	13 years ago
package	drop obselete Config.in file	13 years ago
scripts	patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that	13 years ago
target	Support booting the Speedport W502V using BRN-BOOT.	13 years ago
toolchain	gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary	13 years ago
tools	Support booting the Speedport W502V using BRN-BOOT.	13 years ago
.gitignore	.gitignore: Ignore Emacs editor generated files	13 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	13 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	abort built in prereq target if there is no site config file for the current target	13 years ago
README	trying to make README file a bit more helpful	13 years ago
feeds.conf.default	Add xorg feed to feeds.conf.default	13 years ago
rules.mk	rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems	13 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org