openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Vincent Wiemann ccb4b96b8a comgt-ncm: add driver dependencies again In the commit `623716dd43` ("comgt-ncm: Fix NCM protocol") the dependencies to vendor NCM drivers were removed, because: > comgt-ncm should not depend on the USB-serial-related kernel modules, > as the cdc-wdm control device works without them. There is also no need > to depend on kmod-huawei-cdc-ncm, since other manufacturers (like > Ericsson and Samsung) which use other kernel modules should also be > supported. From a user-perspective this does not make sense, as installing comgt-ncm (or luci-proto-ncm) should install all needed dependencies for using such a device. Furthermore depending on kmod-huawei-cdc-ncm does not mean that Ericsson and Samsung devices can't be supported. By the way it seems that Ericsson and Samsung devices never used NCM, but act as serial modems. Thus this commit adds the dependencies again. Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com> [fixed title capitalization, formatted commit message, renamed Sony-Ericsson to Ericsson] Signed-off-by: David Bauer <mail@david-bauer.net>		5 years ago
.github	build: Update README & github help	6 years ago
config	config: introduce separate CONFIG_SIGNATURE_CHECK option	5 years ago
include	kernel: bump 4.19 to 4.19.64	5 years ago
package	comgt-ncm: add driver dependencies again	5 years ago
scripts	scripts/ubinize-image.sh: fix buildbot breakage	5 years ago
target	ramips: add support for HiWiFi HC5761A	5 years ago
toolchain	toolchain: Remove powerpc64 libc restriction	5 years ago
tools	ath79: add support for TP-Link CPE220 v2	5 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	.gitignore: add .project & .cproject for eclipse users	7 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	merge: base: update base-files and basic config	7 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	Revert "build: allow simple build system customization with local.mk"	5 years ago
README	build: switch to Python 3	5 years ago
feeds.conf.default	feeds: switch git.lede-project.org URLs to git.openwrt.org	7 years ago
rules.mk	librpc: remove package	5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org