You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/layerscape/patches-4.4/3022-dt-move-guts-devicetre...

109 lines
3.6 KiB
Diff

From 0e9d79db770196e94869650d7c4d13ea23937138 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Mon, 25 Jan 2016 14:27:27 +0800
Subject: [PATCH 22/70] dt: move guts devicetree doc out of powerpc directory
Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/
since it's used by not only PowerPC but also ARM. And add a specification
for 'little-endian' property.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
.../devicetree/bindings/powerpc/fsl/guts.txt | 41 ------------------
Documentation/devicetree/bindings/soc/fsl/guts.txt | 44 ++++++++++++++++++++
2 files changed, 44 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/guts.txt
create mode 100644 Documentation/devicetree/bindings/soc/fsl/guts.txt
--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Global Utilities Block
-
-The global utilities block controls power management, I/O device
-enabling, power-on-reset configuration monitoring, general-purpose
-I/O signal configuration, alternate function selection for multiplexed
-signals, and clock control.
-
-Required properties:
-
- - compatible : Should define the compatible device type for
- global-utilities.
- Possible compatibles:
- "fsl,qoriq-device-config-1.0"
- "fsl,qoriq-device-config-2.0"
- "fsl,<chip>-device-config"
- "fsl,<chip>-guts"
- - reg : Offset and length of the register set for the device.
-
-Recommended properties:
-
- - fsl,has-rstcr : Indicates that the global utilities register set
- contains a functioning "reset control register" (i.e. the board
- is wired to reset upon setting the HRESET_REQ bit in this register).
-
- - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
- registers, for those SOCs that have a PAMU device.
-
-Examples:
- global-utilities@e0000 { /* global utilities block */
- compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
- fsl,has-rstcr;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -0,0 +1,44 @@
+* Global Utilities Block
+
+The global utilities block controls power management, I/O device
+enabling, power-on-reset configuration monitoring, general-purpose
+I/O signal configuration, alternate function selection for multiplexed
+signals, and clock control.
+
+Required properties:
+
+ - compatible : Should define the compatible device type for
+ global-utilities.
+ Possible compatibles:
+ "fsl,qoriq-device-config-1.0"
+ "fsl,qoriq-device-config-2.0"
+ "fsl,<chip>-device-config"
+ "fsl,<chip>-guts"
+ - reg : Offset and length of the register set for the device.
+
+Recommended properties:
+
+ - fsl,has-rstcr : Indicates that the global utilities register set
+ contains a functioning "reset control register" (i.e. the board
+ is wired to reset upon setting the HRESET_REQ bit in this register).
+
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+ registers, for those SOCs that have a PAMU device.
+
+ - little-endian : Indicates that the global utilities block is little
+ endian. The default is big endian.
+
+Examples:
+ global-utilities@e0000 { /* global utilities block */
+ compatible = "fsl,mpc8548-guts";
+ reg = <e0000 1000>;
+ fsl,has-rstcr;
+ };
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };