You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

INAGAKI Hiroshi c566439c9b ath79: add support for NEC Aterm WG800HP ... NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9563. Specification: - Qualcomm Atheros QCA9563 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2.4/5 GHz wifi - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 1T1R (QCA9887) - 4x 10/100/1000 Mbps Ethernet - 8x LEDs, 3x keys (2x buttons, 1x slide-switch) - UART through-hole on PCB (J2) - Vcc, GND, NC, TX, RX from SoC side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port on WG800HP 2. Connect power cable to WG800HP and turn on it 3. Access to "http://192.168.10.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		6 years ago
..
imagebuilder	imagebuilder: manifest function show stderr	6 years ago
linux	ath79: add support for NEC Aterm WG800HP	6 years ago
sdk	sdk: find kernel modules when KDIR is a symlink	6 years ago
toolchain	merge: etc: update remaining files	7 years ago
Config.in	build: add support for enabling the rootfs/boot partition size option via target feature	6 years ago
Makefile	build: make <subdir>/install opt-in, use it for target/ only	7 years ago