You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Sungbo Eo a4e9c8f14b ramips: add support for netis WF2770 ... netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>		4 years ago
..
imagebuilder	build: refactor JSON info files to `profiles.json`	4 years ago
linux	ramips: add support for netis WF2770	4 years ago
sdk	sdk: use bundle-libraries.sh to ship kernel objtool tools	5 years ago
toolchain	toolchain: wrapper.sh: harmonize leading whitespaces	4 years ago
Config.in	build: define RTC_SUPPORT as a bool	4 years ago
Makefile	build: make <subdir>/install opt-in, use it for target/ only	7 years ago