You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/s3c24xx/patches-2.6.26/1160-fix-glamo-mci-relation...

111 lines
3.6 KiB
Diff

From 7af35792e1165cb9258e192ddfcb03393eb76f86 Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Fri, 25 Jul 2008 23:06:12 +0100
Subject: [PATCH] fix-glamo-mci-relationship-with-pcf50633-suspend-resume.patch
After protecting pcf50633 read and write primitives against
operation after suspend or before resume (by blowing a
stack_trace()) I saw glamo-mci was trying to use pcf50633
at these bad times on its own suspend and resume. Since that
part was already done via platform callback, I added an
export in pcf50633 that tells you if it is ready or busy,
and used it to defer (resume power on case) or ignore
(suspend power off case, since pcf50633 already did it)
the mci power call.
Signed-off-by: Andy Green <andy@openmoko.com>
---
arch/arm/mach-s3c2440/mach-gta02.c | 17 ++++++++++-------
drivers/i2c/chips/pcf50633.c | 14 ++++++++++++++
include/linux/pcf50633.h | 5 +++++
3 files changed, 29 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 22de181..5980ea9 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -1277,13 +1277,12 @@ gta02_glamo_mmc_set_power(unsigned char power_mode, unsigned short vdd)
case GTA02v4_SYSTEM_REV:
case GTA02v5_SYSTEM_REV:
case GTA02v6_SYSTEM_REV:
- /* depend on pcf50633 driver init */
- if (!pcf50633_global)
- while (!pcf50633_global)
- msleep(10);
switch (power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
+ /* depend on pcf50633 driver init + not suspended */
+ while (pcf50633_ready(pcf50633_global))
+ msleep(1);
/* select and set the voltage */
if (vdd > 7) {
mv += 300 + 100 * (vdd - 8);
@@ -1292,15 +1291,19 @@ gta02_glamo_mmc_set_power(unsigned char power_mode, unsigned short vdd)
}
pcf50633_voltage_set(pcf50633_global,
PCF50633_REGULATOR_HCLDO, mv);
- msleep(10);
pcf50633_onoff_set(pcf50633_global,
PCF50633_REGULATOR_HCLDO, 1);
- msleep(1);
break;
case MMC_POWER_OFF:
+ /* power off happens during suspend, when pcf50633 can
+ * be already gone and not coming back... just forget
+ * the action then because pcf50633 suspend already
+ * dealt with it, otherwise we spin forever
+ */
+ if (pcf50633_ready(pcf50633_global))
+ return;
pcf50633_onoff_set(pcf50633_global,
PCF50633_REGULATOR_HCLDO, 0);
- msleep(1);
break;
}
break;
diff --git a/drivers/i2c/chips/pcf50633.c b/drivers/i2c/chips/pcf50633.c
index c148ea7..82ee2f0 100644
--- a/drivers/i2c/chips/pcf50633.c
+++ b/drivers/i2c/chips/pcf50633.c
@@ -2230,6 +2230,20 @@ static int pcf50633_suspend(struct device *dev, pm_message_t state)
return 0;
}
+
+int pcf50633_ready(struct pcf50633_data *pcf)
+{
+ if (!pcf)
+ return -EBUSY;
+
+ if (pcf->have_been_suspended)
+ return -EBUSY;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_ready);
+
+
/*
* if backlight resume is selected to be deferred by platform, then it
* can call this to finally reset backlight status (after LCM is resumed
diff --git a/include/linux/pcf50633.h b/include/linux/pcf50633.h
index 8a75b28..0522d92 100644
--- a/include/linux/pcf50633.h
+++ b/include/linux/pcf50633.h
@@ -129,6 +129,11 @@ extern void
pcf50633_register_resume_dependency(struct pcf50633_data *pcf,
struct resume_dependency *dep);
+/* 0 = initialized and resumed and ready to roll, !=0 = either not
+ * initialized or not resumed yet
+ */
+extern int
+pcf50633_ready(struct pcf50633_data *pcf);
#define PCF50633_FEAT_EXTON 0x00000001 /* not yet supported */
#define PCF50633_FEAT_MBC 0x00000002
--
1.5.6.3