openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Andrey Bondar ba59021d64 ath79: add support for 8devices Lima board Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com>		4 years ago
.github	build: Update README & github help	6 years ago
config	kernel: rename CONFIG_NETPRIO_CGROUP to CONFIG_CGROUP_NET_PRIO	4 years ago
include	build: add 'make kernel_xconfig' command	4 years ago
package	comgt: add new script to send ussd request and get the answer	4 years ago
scripts	build: fix compatibility with python 3.6	4 years ago
target	ath79: add support for 8devices Lima board	4 years ago
toolchain	toolchain: remove gcc libssp and use libc variant	4 years ago
tools	ramips: add support for TP-Link RE500 v1	4 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	Revert ".gitignore: ignore more scripts/config output"	4 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	merge: base: update base-files and basic config	6 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: refactor JSON info files to `profiles.json`	4 years ago
README	build: switch to Python 3	5 years ago
feeds.conf.default	feeds: add freifunk feed	4 years ago
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org