OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Go to file
Christopher Hill b7a8a54542 ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported
from the ar71xx target.

See https://routerboard.com/RB493G for details

Specification:
- SoC Qualcomm Atheros AR7161
- RAM: 256 MiB
- Storage: 128MiB NAND
- Ethernet: 9x 1000/100/10 Mbps
- USB 1x 2.0 / 1.0 type A
- PCIe: 3x Mini slot
- MicroSD slot

Working:
- Board/system detection
- Ethernet
- SPI
- NAND
- LEDs
- USB
- Sysupgrade

Enabled (but untested due to lack of hardware):
- PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed

Installation methods:
- tftp boot initramfs image, scp then flash via "sysupgrade -n"
- nand boot existing OpenWrt, scp then flash via "sysupgrade -n"

Notes:
- initramfs image will not work if uncompressed image size over ~8.5Mb
- The "rb4xx" drivers have been enabled

Signed-off-by: Christopher Hill <ch6574@gmail.com>
4 years ago
.github build: Update README & github help 6 years ago
config ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) 4 years ago
include kernel: bump 5.4 to 5.4.45 4 years ago
package kirkwood: move mmc/sd features to modules 4 years ago
scripts scripts: config: remove accidentally added file 4 years ago
target ath79: add support for MikroTik RouterBOARD 493G (rb4xx series) 4 years ago
toolchain musl: use official release tar 4 years ago
tools mkchkimg: use higher version code 4 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore Revert ".gitignore: ignore more scripts/config output" 4 years ago
BSDmakefile add missing copyright header 17 years ago
Config.in merge: base: update base-files and basic config 6 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile build: refactor JSON info files to `profiles.json` 4 years ago
README build: switch to Python 3 5 years ago
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 6 years ago
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org