openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

John Crispin b6fbe7bd5d tools: genext2fs: add support for blocksize != 1024 This patch series is extracted from http://ftp.de.debian.org/debian/pool/main/g/genext2fs/genext2fs_1.4.1-4.debian.tar.gz The patches are used in Debian for quite a long time, so I assume that this is solid material. At least, my Ubuntu host fsck.ext4 does not bark :-) The goal is to allow building filesystems with larger blocksizes instead of the current default of 1k. This should improve performance and lifetime when the filesystem is stored e.g. on a SD card (on Raspberry Pi/I2SE Duckbill for example) which uses internal flash memory. Writing to flash memory is slow because writing the data of one block results in erasing a whole erase block of the flash memory. Thus it is preferable to align the filesystem block size on a flash device with the erase blocksize, or at least bring it closer to the later one, to avoid unnecessary write amplification. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 40921		10 years ago
config	kernel: add a config option for enabling /proc/slabinfo	10 years ago
docs	docs: update remaining references to functions.sh	12 years ago
include	include: fix kernel download failure with git & local trees	10 years ago
package	lantiq: Add ARV7510PW22 support	10 years ago
scripts	metadata.pl: suppress profile config.in code for targets that have subtargets (fixes #14480 )	10 years ago
target	lantiq: Fix ARV7510PW22 etop	10 years ago
toolchain	eglibc: add support for other mips64 ABI variants as well	10 years ago
tools	tools: genext2fs: add support for blocksize != 1024	10 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	add git-src to .gitignore	11 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	move menuconfig options into separate files	11 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: remove duplicate variable definitions	10 years ago
README	build: BSD compile fixes	11 years ago
feeds.conf.default	feeds.conf.default: the telephony feed is now on git.openwrt.org	10 years ago
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	10 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org