openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Felix Fietkau b5ddcb18fa use unexport instead of export to clear perforce variables SVN-Revision: 15708		15 years ago
docs	get rid of $Id$ - it has never helped us and it has broken too many patches ;)	15 years ago
include	use unexport instead of export to clear perforce variables	15 years ago
package	madwifi: fix selection of phy errors in the rx filter	15 years ago
scripts	scripts/feeds: ignore virtual packages	15 years ago
target	backport mv88e6095 support for orion - this also fixes the non-working switch-port on some routers	15 years ago
toolchain	Fix Image Builder building - added missing /bin dir to toolchain Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>	15 years ago
tools	rename tools/lzma to tools/lzma-old (preparation for adding a new lzma version)	15 years ago
.gitignore	add logs/ to .gitignore	15 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	15 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	avoid implicit rules in even more places	15 years ago
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	16 years ago
feeds.conf.default	feeds.conf.default: Change openwrt feeds urls from https to svn	15 years ago
rules.mk	get rid of $Id$ - it has never helped us and it has broken too many patches ;)	15 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org