openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Felix Fietkau aee9d6c31c add a heavily cleaned up version of ubicom32 toolchain support SVN-Revision: 17346		15 years ago
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	15 years ago
include	merge the control file and the .ipk file targets into one to prevent them from going out of sync	15 years ago
package	mac80211: fix a race condition in the cfg80211 scanning code (thx, johill)	15 years ago
scripts	add a heavily cleaned up version of ubicom32 toolchain support	15 years ago
target	add a heavily cleaned up version of ubicom32 toolchain support	15 years ago
toolchain	add a heavily cleaned up version of ubicom32 toolchain support	15 years ago
tools	update mpfr to 2.4.1	15 years ago
.gitignore	add logs/ to .gitignore	15 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	add menuconfig option for selecting initramfs compression	15 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	15 years ago
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	16 years ago
feeds.conf.default	switch to LuCI 0.9.x branch	15 years ago
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	15 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org