You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79
Andrew Cameron 20fdfe37d2 ath79: add support for the TP-LINK WBS510 V1
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
5 years ago
..
base-files/etc/hotplug.d/ieee80211 ath79: split base-files into subtargets 5 years ago
dts ath79: add support for the TP-LINK WBS510 V1 5 years ago
files ath79: add AR934x NAND Flash Controller driver 5 years ago
generic ath79: add support for the TP-LINK WBS510 V1 5 years ago
image ath79: add support for the TP-LINK WBS510 V1 5 years ago
nand ath79: add support for Netgear WNDR3700v4 5 years ago
patches-4.14 ath79: disable delays on AT803X config init 5 years ago
patches-4.19 ath79: disable delays on AT803X config init 5 years ago
tiny ath79: fix sorting and harmonize indent in tiny board.d files 5 years ago
Makefile treewide: kernel: bump some targets to 4.19 5 years ago
config-4.14 ath79: enable PCI for whole target 5 years ago
config-4.19 ath79: remove obsolete OF PCI related config symbols 5 years ago
modules.mk ath79: add new OF only target for QCA MIPS silicon 6 years ago