You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Weijie Gao abc7ed2c58 ath79: add support for D-Link DIR-859 A1 ... Hardware spec of DIR-859 A1: SoC: QCA9563 DRAM: 64MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9880 USB is supported on the PCB but not connected. Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Weijie Gao <hackpascal@gmail.com> [squash commits, use common seama recipes, sync factory image recipe with ramips version] Signed-off-by: Mathias Kresin <dev@kresin.me>		5 years ago
..
imagebuilder	imagebuilder: manifest function show stderr	6 years ago
linux	ath79: add support for D-Link DIR-859 A1	5 years ago
sdk	sdk: find kernel modules when KDIR is a symlink	6 years ago
toolchain	merge: etc: update remaining files	7 years ago
Config.in	build: add support for enabling the rootfs/boot partition size option via target feature	6 years ago
Makefile	build: make <subdir>/install opt-in, use it for target/ only	7 years ago