You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts

209 lines
3.8 KiB
Plaintext

/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include "qcom-ipq4019-bus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZyXEL NBG6617";
compatible = "zyxel,nbg6617", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
reserved-memory {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges;
rsvd1@87000000 {
reg = <0x87000000 0x0500000>;
no-map;
};
wifi_dump@87500000 {
reg = <0x87500000 0x600000>;
no-map;
};
rsvd2@87B00000 {
reg = <0x87b00000 0x500000>;
no-map;
};
};
soc {
pinctrl@1000000 {
led_pinmux {
mux {
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
drive-strength = <0x8>;
bias-pull-up;
output-high;
};
};
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "ok";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
mdio@90000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
wifi@a000000 {
status = "okay";
};
wifi@a800000 {
status = "okay";
};
cryptobam: dma@8e04000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
wlan {
label = "wlan";
gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "nbg6617:green:power";
gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>;
};
wps {
label = "nbg6617:green:wps";
gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>;
};
wlan2G {
label = "nbg6617:green:wlan2G";
gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>;
};
wlan5G {
label = "nbg6617:green:wlan5G";
gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>;
};
};
};
&spi_0 { /* BLSP1 QUP1 */
status = "ok";
mx25l25635e@0 {
status = "disabled";
};
n25q128a11@0 {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "all";
reg = <0x00000000 0x08000000>;
read-only; /* for now */
};
};
};
};