You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
53a4502013
Qxwlan E750G v8 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4G GHz (AR9344) - 2x 10/100 Mbps Ethernet (PoE support) - 2x 10/100/1000 Mbps Ethernet - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> |
6 years ago | |
|---|---|---|
| .. | ||
| lzma-loader | 6 years ago | |
| Makefile | 6 years ago | |
| common-tp-link.mk | 6 years ago | |
| generic-legacy-devices.mk | 6 years ago | |
| generic-senao.mk | 6 years ago | |
| generic-tp-link.mk | 6 years ago | |
| generic-ubnt.mk | 6 years ago | |
| generic.mk | 6 years ago | |
| legacy.mk | 6 years ago | |
| mikrotik.mk | 6 years ago | |
| nand.mk | 7 years ago | |
| tiny-legacy-devices.mk | 6 years ago | |
| tiny-tp-link.mk | 6 years ago | |
| tiny.mk | 6 years ago | |
| ubinize-nbg6716.ini | 10 years ago | |
| ubinize-wndr4300.ini | 10 years ago | |