dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
45,077 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'a1c6a316d2'
${ noResults }
Go to file
NOGUCHI Hiroshi a1c6a316d2 ramips: add support for Fon FON2601 
FON2601 is a wireless router.

Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
   for 11b/g/n (upto 300 Mbps):  MT7620A built-in WMAC
   for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
 pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)

Installation (only available via UART):
  1. download sysupgrade binary image by wget command
  2. write sysupgrade binary image to Flash
     command is:
       mtd write sysupgrade.bin firmware
  3. reboot

Important Notice:
  Only one button is displayed as "WPS" on enclosure.
  However, it is configured as "reset" (factory resetting feature).

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
 		5 years ago
.github build: Update README & github help 6 years ago
config brcm2708: add linux 4.19 support 5 years ago
include autotools.mk: autoreconf: fix missing install-sh 5 years ago
package wireless-regdb: set PKGARCH:=all 5 years ago
scripts scripts/jungo-image: convert to Python 3 with 2-to-3 5 years ago
target ramips: add support for Fon FON2601 5 years ago
toolchain toolchain: Don't force GCC8 on ARC 5 years ago
tools ramips: add support for Fon FON2601 5 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore .gitignore: add .project & .cproject for eclipse users 6 years ago
BSDmakefile add missing copyright header 17 years ago
Config.in merge: base: update base-files and basic config 7 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile Revert "build: allow simple build system customization with local.mk" 5 years ago
README build: switch to Python 3 5 years ago
feeds.conf.default feeds: switch git.lede-project.org URLs to git.openwrt.org 6 years ago
rules.mk librpc: remove package 5 years ago

README 

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org