OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Go to file
Felix Fietkau 98fb380d88 mt76: update to the latest version, fixes setting per-vif mac address
d02a05b mt7603: update firmware to version 20160107100755
4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
170f334 mt76x2: remove MAC address limitation for multi-vif setups
3563b8f mt76x2: clean up MAC/BSSID address initialization
9de77e1 mt76x2: drop wiphy->addresses
a6a6e25 mt76x2: init: disable APCLI by default
c64633e mt76x2: configure rx filter based on monitor mode setting
ac815fa mt76x2: init: fix rx filter default value during init
e504656 mt7603: configure other-unicast drop based on monitor mode setting

Signed-off-by: Felix Fietkau <>
6 years ago
.github github: include pull request template 7 years ago
config mpc85xx: Enable initramfs for p1020 subtarget 6 years ago
include kernel: bump 4.9 to 4.9.67 6 years ago
package mt76: update to the latest version, fixes setting per-vif mac address 6 years ago
scripts scripts/config: add qconf files to .gitignore 6 years ago
target ar71xx: C58/C59 fix LAN1 working incorrectly 6 years ago
toolchain toolchain/musl: update to version 1.1.18 6 years ago
tools tools/sstrip: Fix compile under standard linux. 6 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore gitignore: add /overlay 7 years ago
BSDmakefile add missing copyright header 17 years ago branding: add LEDE branding 8 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile build: prepare config.seed before package compilation 7 years ago
README README: Update project README 8 years ago
feeds.conf.default Add video feed to feeds.conf.default 7 years ago this patch broken grub2 builds 6 years ago


This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

	Your LEDE Community