You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Sungbo Eo 19800ac095 ramips: set uImage name of WeVO 11AC NAS and W2914NS v2
The stock firmware and bootloader only accept uImage with names that
match certain patterns. This patch enables OpenWrt installation from
stock firmware without having to reflash the bootloader or access the
UART console.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
5 years ago
..
base-files ramips: split further base-files across subtargets 5 years ago
dts ramips: assign correct key-code to wps buttons 5 years ago
files-4.14/drivers ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random 5 years ago
image ramips: set uImage name of WeVO 11AC NAS and W2914NS v2 5 years ago
mt76x8 ramips: support dual image feature on ALFA Network boards 5 years ago
mt7620 ramips: add support for ALFA Network R36M-E4G 5 years ago
mt7621 ramips: add support for ALFA Network Quad-E4G 5 years ago
patches-4.14 kernel: bump 4.14 to 4.14.147 5 years ago
rt288x ramips: remove default case for MAC address assignment 5 years ago
rt305x ramips: read label MAC address from flash instead of using phy0/phy1 5 years ago
rt3883 ramips: improve Samsung CY-SWR1100 support 5 years ago
Makefile ramips: switch to linux 4.14 6 years ago
modules.mk kernel: Fix kmod-regmap split 5 years ago