openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Gabor Juhos 8daeba6d47 atheros: fix kernel warning about usage of reset gpio During a reset the gpiolib warns about using the reset gpio without explicit requesting it before: [ 147.930000] ------------[ cut here ]------------ [ 147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc() [ 147.930000] autorequest GPIO-5 [ 147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug [ 147.930000] Call Trace: [ 147.930000] [<8004e3bc>] dump_stack+0x8/0x34 [ 147.930000] [<80058430>] warn_slowpath_common+0x78/0xa4 [ 147.930000] [<800584e4>] warn_slowpath_fmt+0x2c/0x38 [ 147.930000] [<80166f18>] gpio_ensure_requested+0x68/0xcc [ 147.930000] [<80167264>] gpio_direction_output+0xdc/0x168 [ 147.930000] [<8004aba8>] ar2315_restart+0x28/0x54 [ 147.930000] [<80069778>] sys_reboot+0x178/0x1c0 [ 147.930000] [<80043670>] stack_done+0x20/0x40 [ 147.930000] [ 147.930000] ---[ end trace 2c7a53d8549562d6 ]--- This is fixed with this patch by using another gpiolib api call which includes the missing request. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38183		11 years ago
docs	docs: update remaining references to functions.sh	12 years ago
include	include: add AutoProbe support	11 years ago
package	uhttpd: fix appending https ports to cmdline	11 years ago
scripts	feeds: enable cloning of specific git commit	11 years ago
target	atheros: fix kernel warning about usage of reset gpio	11 years ago
toolchain	toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05	11 years ago
tools	quilt: update to 0.60	11 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	.gitignore: Ignore Emacs editor generated files	13 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	build: enable MIPS16 again, but make it depend on !gcc-4.6	11 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	12 years ago
README	build: BSD compile fixes	11 years ago
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	11 years ago
rules.mk	build: decouple the mips16 support flag from the toolchain	11 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org