You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
6da3194127
This patch adds supports for the NETGEAR R6200 V1 This device is mainlined in Linux as of 5.4 Specification: - SOC: Broadcom BCM4718A1 (480 MHz) - Flash: 16MB (Macronix MX25L128) - RAM: 128MB DDR2 - SWITCH: BCM53125 - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order) - WLAN 2.4G: In SOC - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360) - USB: 1x USB 2.0 port (Type A) - Buttons: Reset, WLAN, WPS - LED: Amber for Power, others need a workaround - UART: 1x UART on PCB LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7) Firmware Install Instructions ============================= Using the device specific .chk, use that file to perform a normal device upgrade in the OEM admin page. Signed-off-by: Edward Matijevic <motolav@gmail.com> |
4 years ago | |
|---|---|---|
| .. | ||
| 031-v5.1-mips-bcm47xx-Enable-USB-power-on-Netgear-WNDR3400v2.patch | ||
| 032-v5.4-MIPS-BCM47XX-Add-support-for-Netgear-R6200v1.patch | 4 years ago | |
| 159-cpu_fixes.patch | ||
| 160-kmap_coherent.patch | ||
| 209-b44-register-adm-switch.patch | ||
| 210-b44_phy_fix.patch | ||
| 280-activate_ssb_support_in_usb.patch | ||
| 300-fork_cacheflush.patch | ||
| 310-no_highpage.patch | ||
| 320-MIPS-BCM47XX-Devices-database-update-for-4.x.patch | 4 years ago | |
| 400-mtd-bcm47xxpart-get-nvram.patch | ||
| 610-pci_ide_fix.patch | ||
| 791-tg3-no-pci-sleep.patch | ||
| 800-bcma-add-table-of-serial-flashes-with-smaller-blocks.patch | ||
| 820-wgt634u-nvram-fix.patch | ||
| 830-huawei_e970_support.patch | ||
| 831-old_gpio_wdt.patch | ||
| 900-ssb-reject-PCI-writes-setting-CardBus-bridge-resourc.patch | ||
| 940-bcm47xx-yenta.patch | ||
| 976-ssb_increase_pci_delay.patch | ||
| 999-wl_exports.patch | ||