OpenWRT firmware for routers
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Felix Fietkau 7fb394b9ab add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 11 years ago
docs kamikaze has been released long ago 12 years ago
include kernel: update linux 3.3 to 3.3.5 11 years ago
package ppp: remove stray bracked in ppp-up script, thanks swalker 11 years ago
scripts ext-toolchain.sh: don't pass CFLAGS when wrapping ld 11 years ago
target ar71xx: fix build error if PCI is disabled 11 years ago
toolchain switch to 2.6.38 11 years ago
tools scons: fix compatibility with python 3, upstream still does not support it... 11 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 11 years ago
.gitignore .gitignore: Ignore Emacs editor generated files 11 years ago
BSDmakefile add missing copyright header 16 years ago
Config.in make xz ramdisk images also available for 2.6.39+ 11 years ago
LICENSE finally move buildroot-ng to trunk 7 years ago
Makefile abort built in prereq target if there is no site config file for the current target 11 years ago
README trying to make README file a bit more helpful 11 years ago
feeds.conf.default Add xorg feed to feeds.conf.default 11 years ago
rules.mk Use build suffix on build_dir paths 11 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
Your OpenWrt Project
http://openwrt.org