dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '7d7aa2fd92'
${ noResults }
openwrt/target/linux/bcm27xx/patches-4.19/950-0565-bcm2835-dma-Add-pr...

1019 lines
33 KiB
Diff
Raw Blame History

From 621fb1606217c3e72feda69255ae6cb6a7ccfec2 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 4 Apr 2019 13:33:47 +0100
Subject: [PATCH] bcm2835-dma: Add proper 40-bit DMA support
The 40-bit additions are not fully tested, but it should be
capable of supporting both 40-bit memcpy on BCM2711 and regular
Lite channels on BCM2835.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/boot/dts/bcm2838.dtsi | 33 +-
drivers/dma/bcm2835-dma.c | 426 ++++++++++++++-----
drivers/pci/controller/pcie-brcmstb-bounce.c | 30 +-
drivers/pci/controller/pcie-brcmstb-bounce.h | 21 +-
drivers/pci/controller/pcie-brcmstb.c | 23 +-
5 files changed, 395 insertions(+), 138 deletions(-)
--- a/arch/arm/boot/dts/bcm2838.dtsi
+++ b/arch/arm/boot/dts/bcm2838.dtsi
@@ -372,6 +372,23 @@
};
};
+ dma40: dma@7e007b00 {
+ compatible = "brcm,bcm2838-dma";
+ reg = <0x0 0x7e007b00 0x400>;
+ interrupts =
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
+ interrupt-names = "dma11",
+ "dma12",
+ "dma13",
+ "dma14";
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x7000>;
+ };
+ /* DMA4 - 40 bit DMA engines */
+
xhci: xhci@7e9c0000 {
compatible = "generic-xhci";
status = "disabled";
@@ -689,6 +706,7 @@
};
&dma {
+ reg = <0x7e007000 0xb00>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
@@ -699,12 +717,7 @@
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 7 */
<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 8 */
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 9 */
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite 10 */
- /* DMA4 - 40 bit DMA engines */
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
- <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */
interrupt-names = "dma0",
"dma1",
"dma2",
@@ -715,10 +728,6 @@
"dma7",
"dma8",
"dma9",
- "dma10",
- "dma11",
- "dma12",
- "dma13",
- "dma14";
- brcm,dma-channel-mask = <0x7ef5>;
+ "dma10";
+ brcm,dma-channel-mask = <0x01f5>;
};
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -50,12 +50,18 @@
#define BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED 14
#define BCM2835_DMA_CHAN_NAME_SIZE 8
#define BCM2835_DMA_BULK_MASK BIT(0)
+#define BCM2838_DMA_MEMCPY_CHAN 14
+
+struct bcm2835_dma_cfg_data {
+ u32 chan_40bit_mask;
+};
struct bcm2835_dmadev {
struct dma_device ddev;
spinlock_t lock;
void __iomem *base;
struct device_dma_parameters dma_parms;
+ const struct bcm2835_dma_cfg_data *cfg_data;
};
struct bcm2835_dma_cb {
@@ -100,6 +106,7 @@ struct bcm2835_chan {
unsigned int irq_flags;
bool is_lite_channel;
+ bool is_40bit_channel;
};
struct bcm2835_desc {
@@ -189,7 +196,8 @@ struct bcm2835_desc {
#define BCM2835_DMA_DATA_TYPE_S128 16
/* Valid only for channels 0 - 14, 15 has its own base address */
-#define BCM2835_DMA_CHAN(n) ((n) << 8) /* Base address */
+#define BCM2835_DMA_CHAN_SIZE 0x100
+#define BCM2835_DMA_CHAN(n) ((n) * BCM2835_DMA_CHAN_SIZE) /* Base address */
#define BCM2835_DMA_CHANIO(base, n) ((base) + BCM2835_DMA_CHAN(n))
/* the max dma length for different channels */
@@ -200,7 +208,7 @@ struct bcm2835_desc {
#define BCM2838_DMA40_CS 0x00
#define BCM2838_DMA40_CB 0x04
#define BCM2838_DMA40_DEBUG 0x0c
-#define BCM2858_DMA40_TI 0x10
+#define BCM2838_DMA40_TI 0x10
#define BCM2838_DMA40_SRC 0x14
#define BCM2838_DMA40_SRCI 0x18
#define BCM2838_DMA40_DEST 0x1c
@@ -209,32 +217,97 @@ struct bcm2835_desc {
#define BCM2838_DMA40_NEXT_CB 0x28
#define BCM2838_DMA40_DEBUG2 0x2c
-#define BCM2838_DMA40_CS_ACTIVE BIT(0)
-#define BCM2838_DMA40_CS_END BIT(1)
+#define BCM2838_DMA40_ACTIVE BIT(0)
+#define BCM2838_DMA40_END BIT(1)
+#define BCM2838_DMA40_INT BIT(2)
+#define BCM2838_DMA40_DREQ BIT(3) /* DREQ state */
+#define BCM2838_DMA40_RD_PAUSED BIT(4) /* Reading is paused */
+#define BCM2838_DMA40_WR_PAUSED BIT(5) /* Writing is paused */
+#define BCM2838_DMA40_DREQ_PAUSED BIT(6) /* Is paused by DREQ flow control */
+#define BCM2838_DMA40_WAITING_FOR_WRITES BIT(7) /* Waiting for last write */
+#define BCM2838_DMA40_ERR BIT(10)
+#define BCM2838_DMA40_QOS(x) (((x) & 0x1f) << 16)
+#define BCM2838_DMA40_PANIC_QOS(x) (((x) & 0x1f) << 20)
+#define BCM2838_DMA40_WAIT_FOR_WRITES BIT(28)
+#define BCM2838_DMA40_DISDEBUG BIT(29)
+#define BCM2838_DMA40_ABORT BIT(30)
+#define BCM2838_DMA40_HALT BIT(31)
+#define BCM2838_DMA40_CS_FLAGS(x) (x & (BCM2838_DMA40_QOS(15) | \
+ BCM2838_DMA40_PANIC_QOS(15) | \
+ BCM2838_DMA40_WAIT_FOR_WRITES | \
+ BCM2838_DMA40_DISDEBUG))
+
+/* Transfer information bits */
+#define BCM2838_DMA40_INTEN BIT(0)
+#define BCM2838_DMA40_TDMODE BIT(1) /* 2D-Mode */
+#define BCM2838_DMA40_WAIT_RESP BIT(2) /* wait for AXI write to be acked */
+#define BCM2838_DMA40_WAIT_RD_RESP BIT(3) /* wait for AXI read to complete */
+#define BCM2838_DMA40_PER_MAP(x) ((x & 31) << 9) /* REQ source */
+#define BCM2838_DMA40_S_DREQ BIT(14) /* enable SREQ for source */
+#define BCM2838_DMA40_D_DREQ BIT(15) /* enable DREQ for destination */
+#define BCM2838_DMA40_S_WAIT(x) ((x & 0xff) << 16) /* add DMA read-wait cycles */
+#define BCM2838_DMA40_D_WAIT(x) ((x & 0xff) << 24) /* add DMA write-wait cycles */
-#define BCM2838_DMA40_CS_QOS(x) (((x) & 0x1f) << 16)
-#define BCM2838_DMA40_CS_PANIC_QOS(x) (((x) & 0x1f) << 20)
-#define BCM2838_DMA40_CS_WRITE_WAIT BIT(28)
+/* debug register bits */
+#define BCM2838_DMA40_DEBUG_WRITE_ERR BIT(0)
+#define BCM2838_DMA40_DEBUG_FIFO_ERR BIT(1)
+#define BCM2838_DMA40_DEBUG_READ_ERR BIT(2)
+#define BCM2838_DMA40_DEBUG_READ_CB_ERR BIT(3)
+#define BCM2838_DMA40_DEBUG_IN_ON_ERR BIT(8)
+#define BCM2838_DMA40_DEBUG_ABORT_ON_ERR BIT(9)
+#define BCM2838_DMA40_DEBUG_HALT_ON_ERR BIT(10)
+#define BCM2838_DMA40_DEBUG_DISABLE_CLK_GATE BIT(11)
+#define BCM2838_DMA40_DEBUG_RSTATE_SHIFT 14
+#define BCM2838_DMA40_DEBUG_RSTATE_BITS 4
+#define BCM2838_DMA40_DEBUG_WSTATE_SHIFT 18
+#define BCM2838_DMA40_DEBUG_WSTATE_BITS 4
+#define BCM2838_DMA40_DEBUG_RESET BIT(23)
+#define BCM2838_DMA40_DEBUG_ID_SHIFT 24
+#define BCM2838_DMA40_DEBUG_ID_BITS 4
+#define BCM2838_DMA40_DEBUG_VERSION_SHIFT 28
+#define BCM2838_DMA40_DEBUG_VERSION_BITS 4
+
+/* Valid only for channels 0 - 3 (11 - 14) */
+#define BCM2838_DMA40_CHAN(n) (((n) + 11) << 8) /* Base address */
+#define BCM2838_DMA40_CHANIO(base, n) ((base) + BCM2838_DMA_CHAN(n))
-#define BCM2838_DMA40_BURST_LEN(x) ((((x) - 1) & 0xf) << 8)
-#define BCM2838_DMA40_INC BIT(12)
-#define BCM2838_DMA40_SIZE_128 (2 << 13)
+/* the max dma length for different channels */
+#define MAX_DMA40_LEN SZ_1G
-#define BCM2838_DMA40_MEMCPY_QOS \
- (BCM2838_DMA40_CS_QOS(0x0) | \
- BCM2838_DMA40_CS_PANIC_QOS(0x0) | \
- BCM2838_DMA40_CS_WRITE_WAIT)
+#define BCM2838_DMA40_BURST_LEN(x) ((min(x,16) - 1) << 8)
+#define BCM2838_DMA40_INC BIT(12)
+#define BCM2838_DMA40_SIZE_32 (0 << 13)
+#define BCM2838_DMA40_SIZE_64 (1 << 13)
+#define BCM2838_DMA40_SIZE_128 (2 << 13)
+#define BCM2838_DMA40_SIZE_256 (3 << 13)
+#define BCM2838_DMA40_IGNORE BIT(15)
+#define BCM2838_DMA40_STRIDE(x) ((x) << 16) /* For 2D mode */
+
+#define BCM2838_DMA40_MEMCPY_FLAGS \
+ (BCM2838_DMA40_QOS(0) | \
+ BCM2838_DMA40_PANIC_QOS(0) | \
+ BCM2838_DMA40_WAIT_FOR_WRITES | \
+ BCM2838_DMA40_DISDEBUG)
#define BCM2838_DMA40_MEMCPY_XFER_INFO \
(BCM2838_DMA40_SIZE_128 | \
BCM2838_DMA40_INC | \
BCM2838_DMA40_BURST_LEN(16))
+struct bcm2835_dmadev *memcpy_parent;
static void __iomem *memcpy_chan;
static struct bcm2838_dma40_scb *memcpy_scb;
static dma_addr_t memcpy_scb_dma;
DEFINE_SPINLOCK(memcpy_lock);
+static const struct bcm2835_dma_cfg_data bcm2835_dma_cfg = {
+ .chan_40bit_mask = 0,
+};
+
+static const struct bcm2835_dma_cfg_data bcm2838_dma_cfg = {
+ .chan_40bit_mask = BIT(11) | BIT(12) | BIT(13) | BIT(14),
+};
+
static inline size_t bcm2835_dma_max_frame_length(struct bcm2835_chan *c)
{
/* lite and normal channels have different max frame length */
@@ -264,6 +337,32 @@ static inline struct bcm2835_desc *to_bc
return container_of(t, struct bcm2835_desc, vd.tx);
}
+static inline uint32_t to_bcm2838_ti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_INT_EN) ? BCM2838_DMA40_INTEN : 0) |
+ ((info & BCM2835_DMA_WAIT_RESP) ? BCM2838_DMA40_WAIT_RESP : 0) |
+ ((info & BCM2835_DMA_S_DREQ) ?
+ (BCM2838_DMA40_S_DREQ | BCM2838_DMA40_WAIT_RD_RESP) : 0) |
+ ((info & BCM2835_DMA_D_DREQ) ? BCM2838_DMA40_D_DREQ : 0) |
+ BCM2838_DMA40_PER_MAP((info >> 16) & 0x1f);
+}
+
+static inline uint32_t to_bcm2838_srci(uint32_t info)
+{
+ return ((info & BCM2835_DMA_S_INC) ? BCM2838_DMA40_INC : 0);
+}
+
+static inline uint32_t to_bcm2838_dsti(uint32_t info)
+{
+ return ((info & BCM2835_DMA_D_INC) ? BCM2838_DMA40_INC : 0);
+}
+
+static inline uint32_t to_bcm2838_cbaddr(dma_addr_t addr)
+{
+ BUG_ON(addr & 0x1f);
+ return (addr >> 5);
+}
+
static void bcm2835_dma_free_cb_chain(struct bcm2835_desc *desc)
{
size_t i;
@@ -282,45 +381,53 @@ static void bcm2835_dma_desc_free(struct
}
static void bcm2835_dma_create_cb_set_length(
- struct bcm2835_chan *chan,
+ struct bcm2835_chan *c,
struct bcm2835_dma_cb *control_block,
size_t len,
size_t period_len,
size_t *total_len,
u32 finalextrainfo)
{
- size_t max_len = bcm2835_dma_max_frame_length(chan);
+ size_t max_len = bcm2835_dma_max_frame_length(c);
+ uint32_t cb_len;
/* set the length taking lite-channel limitations into account */
- control_block->length = min_t(u32, len, max_len);
+ cb_len = min_t(u32, len, max_len);
- /* finished if we have no period_length */
- if (!period_len)
- return;
+ if (period_len) {
+ /*
+ * period_len means: that we need to generate
+ * transfers that are terminating at every
+ * multiple of period_len - this is typically
+ * used to set the interrupt flag in info
+ * which is required during cyclic transfers
+ */
- /*
- * period_len means: that we need to generate
- * transfers that are terminating at every
- * multiple of period_len - this is typically
- * used to set the interrupt flag in info
- * which is required during cyclic transfers
- */
+ /* have we filled in period_length yet? */
+ if (*total_len + cb_len < period_len) {
+ /* update number of bytes in this period so far */
+ *total_len += cb_len;
+ } else {
+ /* calculate the length that remains to reach period_len */
+ cb_len = period_len - *total_len;
- /* have we filled in period_length yet? */
- if (*total_len + control_block->length < period_len) {
- /* update number of bytes in this period so far */
- *total_len += control_block->length;
- return;
+ /* reset total_length for next period */
+ *total_len = 0;
+ }
}
- /* calculate the length that remains to reach period_length */
- control_block->length = period_len - *total_len;
-
- /* reset total_length for next period */
- *total_len = 0;
-
- /* add extrainfo bits in info */
- control_block->info |= finalextrainfo;
+ if (c->is_40bit_channel) {
+ struct bcm2838_dma40_scb *scb =
+ (struct bcm2838_dma40_scb *)control_block;
+
+ scb->len = cb_len;
+ /* add extrainfo bits to ti */
+ scb->ti |= to_bcm2838_ti(finalextrainfo);
+ } else {
+ control_block->length = cb_len;
+ /* add extrainfo bits to info */
+ control_block->info |= finalextrainfo;
+ }
}
static inline size_t bcm2835_dma_count_frames_for_sg(
@@ -343,7 +450,7 @@ static inline size_t bcm2835_dma_count_f
/**
* bcm2835_dma_create_cb_chain - create a control block and fills data in
*
- * @chan: the @dma_chan for which we run this
+ * @c: the @bcm2835_chan for which we run this
* @direction: the direction in which we transfer
* @cyclic: it is a cyclic transfer
* @info: the default info bits to apply per controlblock
@@ -361,12 +468,11 @@ static inline size_t bcm2835_dma_count_f
* @gfp: the GFP flag to use for allocation
*/
static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
- struct dma_chan *chan, enum dma_transfer_direction direction,
+ struct bcm2835_chan *c, enum dma_transfer_direction direction,
bool cyclic, u32 info, u32 finalextrainfo, size_t frames,
dma_addr_t src, dma_addr_t dst, size_t buf_len,
size_t period_len, gfp_t gfp)
{
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
size_t len = buf_len, total_len;
size_t frame;
struct bcm2835_desc *d;
@@ -399,11 +505,23 @@ static struct bcm2835_desc *bcm2835_dma_
/* fill in the control block */
control_block = cb_entry->cb;
- control_block->info = info;
- control_block->src = src;
- control_block->dst = dst;
- control_block->stride = 0;
- control_block->next = 0;
+ if (c->is_40bit_channel) {
+ struct bcm2838_dma40_scb *scb =
+ (struct bcm2838_dma40_scb *)control_block;
+ scb->ti = to_bcm2838_ti(info);
+ scb->src = lower_32_bits(src);
+ scb->srci= upper_32_bits(src) | to_bcm2838_srci(info);
+ scb->dst = lower_32_bits(dst);
+ scb->dsti = upper_32_bits(dst) | to_bcm2838_dsti(info);
+ scb->next_cb = 0;
+ } else {
+ control_block->info = info;
+ control_block->src = src;
+ control_block->dst = dst;
+ control_block->stride = 0;
+ control_block->next = 0;
+ }
+
/* set up length in control_block if requested */
if (buf_len) {
/* calculate length honoring period_length */
@@ -417,7 +535,10 @@ static struct bcm2835_desc *bcm2835_dma_
}
/* link this the last controlblock */
- if (frame)
+ if (frame && c->is_40bit_channel)
+ d->cb_list[frame - 1].cb->next =
+ to_bcm2838_cbaddr(cb_entry->paddr);
+ if (frame && !c->is_40bit_channel)
d->cb_list[frame - 1].cb->next = cb_entry->paddr;
/* update src and dst and length */
@@ -431,7 +552,14 @@ static struct bcm2835_desc *bcm2835_dma_
}
/* the last frame requires extra flags */
- d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
+ if (c->is_40bit_channel) {
+ struct bcm2838_dma40_scb *scb =
+ (struct bcm2838_dma40_scb *)d->cb_list[d->frames-1].cb;
+
+ scb->ti |= to_bcm2838_ti(finalextrainfo);
+ } else {
+ d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
+ }
/* detect a size missmatch */
if (buf_len && (d->size != buf_len))
@@ -445,28 +573,51 @@ error_cb:
}
static void bcm2835_dma_fill_cb_chain_with_sg(
- struct dma_chan *chan,
+ struct bcm2835_chan *c,
enum dma_transfer_direction direction,
struct bcm2835_cb_entry *cb,
struct scatterlist *sgl,
unsigned int sg_len)
{
- struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
size_t len, max_len;
unsigned int i;
dma_addr_t addr;
struct scatterlist *sgent;
+ pr_err("dma_fill_chain_with_sg(ch %d, dir %d):\n", c->ch, direction);
+
max_len = bcm2835_dma_max_frame_length(c);
for_each_sg(sgl, sgent, sg_len, i) {
- for (addr = sg_dma_address(sgent), len = sg_dma_len(sgent);
- len > 0;
- addr += cb->cb->length, len -= cb->cb->length, cb++) {
- if (direction == DMA_DEV_TO_MEM)
- cb->cb->dst = addr;
- else
- cb->cb->src = addr;
- cb->cb->length = min(len, max_len);
+ if (c->is_40bit_channel) {
+ struct bcm2838_dma40_scb *scb =
+ (struct bcm2838_dma40_scb *)cb->cb;
+ for (addr = sg_dma_address(sgent),
+ len = sg_dma_len(sgent);
+ len > 0;
+ addr += scb->len, len -= scb->len, scb++) {
+ if (direction == DMA_DEV_TO_MEM) {
+ scb->dst = lower_32_bits(addr);
+ scb->dsti = upper_32_bits(addr) | BCM2838_DMA40_INC;
+ } else {
+ scb->src = lower_32_bits(addr);
+ scb->srci = upper_32_bits(addr) | BCM2838_DMA40_INC;
+ }
+ scb->len = min(len, max_len);
+ pr_err(" %llx, %x\n", (u64)addr, scb->len);
+ }
+ } else {
+ for (addr = sg_dma_address(sgent),
+ len = sg_dma_len(sgent);
+ len > 0;
+ addr += cb->cb->length, len -= cb->cb->length,
+ cb++) {
+ if (direction == DMA_DEV_TO_MEM)
+ cb->cb->dst = addr;
+ else
+ cb->cb->src = addr;
+ cb->cb->length = min(len, max_len);
+ pr_err(" %llx, %x\n", (u64)addr, cb->cb->length);
+ }
}
}
}
@@ -475,6 +626,10 @@ static int bcm2835_dma_abort(struct bcm2
{
void __iomem *chan_base = c->chan_base;
long int timeout = 10000;
+ u32 wait_mask = BCM2835_DMA_WAITING_FOR_WRITES;
+
+ if (c->is_40bit_channel)
+ wait_mask = BCM2838_DMA40_WAITING_FOR_WRITES;
/*
* A zero control block address means the channel is idle.
@@ -487,8 +642,7 @@ static int bcm2835_dma_abort(struct bcm2
writel(0, chan_base + BCM2835_DMA_CS);
/* Wait for any current AXI transfer to complete */
- while ((readl(chan_base + BCM2835_DMA_CS) &
- BCM2835_DMA_WAITING_FOR_WRITES) && --timeout)
+ while ((readl(chan_base + BCM2835_DMA_CS) & wait_mask) && --timeout)
cpu_relax();
/* Peripheral might be stuck and fail to signal AXI write responses */
@@ -505,6 +659,7 @@ static void bcm2835_dma_start_desc(struc
struct virt_dma_desc *vd = vchan_next_desc(&c->vc);
struct bcm2835_desc *d;
+ pr_err("dma_start_desc(%px)\n", vd);
if (!vd) {
c->desc = NULL;
return;
@@ -514,9 +669,16 @@ static void bcm2835_dma_start_desc(struc
c->desc = d = to_bcm2835_dma_desc(&vd->tx);
- writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
- writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
- c->chan_base + BCM2835_DMA_CS);
+ if (c->is_40bit_channel) {
+ writel(to_bcm2838_cbaddr(d->cb_list[0].paddr),
+ c->chan_base + BCM2838_DMA40_CB);
+ writel(BCM2838_DMA40_ACTIVE | BCM2838_DMA40_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2838_DMA40_CS);
+ } else {
+ writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
+ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
+ c->chan_base + BCM2835_DMA_CS);
+ }
}
static irqreturn_t bcm2835_dma_callback(int irq, void *data)
@@ -544,7 +706,8 @@ static irqreturn_t bcm2835_dma_callback(
* will remain idle despite the ACTIVE flag being set.
*/
writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE |
- BCM2835_DMA_CS_FLAGS(c->dreq),
+ (c->is_40bit_channel ? BCM2838_DMA40_CS_FLAGS(c->dreq) :
+ BCM2835_DMA_CS_FLAGS(c->dreq)),
c->chan_base + BCM2835_DMA_CS);
d = c->desc;
@@ -643,9 +806,17 @@ static enum dma_status bcm2835_dma_tx_st
struct bcm2835_desc *d = c->desc;
dma_addr_t pos;
- if (d->dir == DMA_MEM_TO_DEV)
+ if (d->dir == DMA_MEM_TO_DEV && c->is_40bit_channel)
+ pos = readl(c->chan_base + BCM2838_DMA40_SRC) +
+ ((readl(c->chan_base + BCM2838_DMA40_SRCI) &
+ 0xff) << 8);
+ else if (d->dir == DMA_MEM_TO_DEV && !c->is_40bit_channel)
pos = readl(c->chan_base + BCM2835_DMA_SOURCE_AD);
- else if (d->dir == DMA_DEV_TO_MEM)
+ else if (d->dir == DMA_DEV_TO_MEM && c->is_40bit_channel)
+ pos = readl(c->chan_base + BCM2838_DMA40_DEST) +
+ ((readl(c->chan_base + BCM2838_DMA40_DESTI) &
+ 0xff) << 8);
+ else if (d->dir == DMA_DEV_TO_MEM && !c->is_40bit_channel)
pos = readl(c->chan_base + BCM2835_DMA_DEST_AD);
else
pos = 0;
@@ -691,7 +862,7 @@ static struct dma_async_tx_descriptor *b
frames = bcm2835_dma_frames_for_length(len, max_len);
/* allocate the CB chain - this also fills in the pointers */
- d = bcm2835_dma_create_cb_chain(chan, DMA_MEM_TO_MEM, false,
+ d = bcm2835_dma_create_cb_chain(c, DMA_MEM_TO_MEM, false,
info, extra, frames,
src, dst, len, 0, GFP_KERNEL);
if (!d)
@@ -726,11 +897,21 @@ static struct dma_async_tx_descriptor *b
if (c->cfg.src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
src = c->cfg.src_addr;
+ /*
+ * One would think it ought to be possible to get the physical
+ * to dma address mapping information from the dma-ranges DT
+ * property, but I've not found a way yet that doesn't involve
+ * open-coding the whole thing.
+ */
+ if (c->is_40bit_channel)
+ src |= 0x400000000ull;
info |= BCM2835_DMA_S_DREQ | BCM2835_DMA_D_INC;
} else {
if (c->cfg.dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
return NULL;
dst = c->cfg.dst_addr;
+ if (c->is_40bit_channel)
+ dst |= 0x400000000ull;
info |= BCM2835_DMA_D_DREQ | BCM2835_DMA_S_INC;
}
@@ -738,7 +919,7 @@ static struct dma_async_tx_descriptor *b
frames = bcm2835_dma_count_frames_for_sg(c, sgl, sg_len);
/* allocate the CB chain */
- d = bcm2835_dma_create_cb_chain(chan, direction, false,
+ d = bcm2835_dma_create_cb_chain(c, direction, false,
info, extra,
frames, src, dst, 0, 0,
GFP_KERNEL);
@@ -746,7 +927,7 @@ static struct dma_async_tx_descriptor *b
return NULL;
/* fill in frames with scatterlist pointers */
- bcm2835_dma_fill_cb_chain_with_sg(chan, direction, d->cb_list,
+ bcm2835_dma_fill_cb_chain_with_sg(c, direction, d->cb_list,
sgl, sg_len);
return vchan_tx_prep(&c->vc, &d->vd, flags);
@@ -815,7 +996,7 @@ static struct dma_async_tx_descriptor *b
* note that we need to use GFP_NOWAIT, as the ALSA i2s dmaengine
* implementation calls prep_dma_cyclic with interrupts disabled.
*/
- d = bcm2835_dma_create_cb_chain(chan, direction, true,
+ d = bcm2835_dma_create_cb_chain(c, direction, true,
info, extra,
frames, src, dst, buf_len,
period_len, GFP_NOWAIT);
@@ -823,7 +1004,8 @@ static struct dma_async_tx_descriptor *b
return NULL;
/* wrap around into a loop */
- d->cb_list[d->frames - 1].cb->next = d->cb_list[0].paddr;
+ d->cb_list[d->frames - 1].cb->next = c->is_40bit_channel ?
+ to_bcm2838_cbaddr(d->cb_list[0].paddr) : d->cb_list[0].paddr;
return vchan_tx_prep(&c->vc, &d->vd, flags);
}
@@ -899,9 +1081,11 @@ static int bcm2835_dma_chan_init(struct
c->irq_number = irq;
c->irq_flags = irq_flags;
- /* check in DEBUG register if this is a LITE channel */
- if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
- BCM2835_DMA_DEBUG_LITE)
+ /* check for 40bit and lite channels */
+ if (d->cfg_data->chan_40bit_mask & BIT(chan_id))
+ c->is_40bit_channel = true;
+ else if (readl(c->chan_base + BCM2835_DMA_DEBUG) &
+ BCM2835_DMA_DEBUG_LITE)
c->is_lite_channel = true;
return 0;
@@ -918,18 +1102,16 @@ static void bcm2835_dma_free(struct bcm2
}
}
-int bcm2838_dma40_memcpy_init(struct device *dev)
+int bcm2838_dma40_memcpy_init(void)
{
- if (memcpy_scb)
- return 0;
+ if (!memcpy_parent)
+ return -EPROBE_DEFER;
- memcpy_scb = dma_alloc_coherent(dev, sizeof(*memcpy_scb),
- &memcpy_scb_dma, GFP_KERNEL);
+ if (!memcpy_chan)
+ return -EINVAL;
- if (!memcpy_scb) {
- pr_err("bcm2838_dma40_memcpy_init failed!\n");
+ if (!memcpy_scb)
return -ENOMEM;
- }
return 0;
}
@@ -956,20 +1138,22 @@ void bcm2838_dma40_memcpy(dma_addr_t dst
scb->next_cb = 0;
writel((u32)(memcpy_scb_dma >> 5), memcpy_chan + BCM2838_DMA40_CB);
- writel(BCM2838_DMA40_MEMCPY_QOS + BCM2838_DMA40_CS_ACTIVE,
+ writel(BCM2838_DMA40_MEMCPY_FLAGS + BCM2838_DMA40_ACTIVE,
memcpy_chan + BCM2838_DMA40_CS);
+
/* Poll for completion */
- while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_CS_END))
+ while (!(readl(memcpy_chan + BCM2838_DMA40_CS) & BCM2838_DMA40_END))
cpu_relax();
- writel(BCM2838_DMA40_CS_END, memcpy_chan + BCM2838_DMA40_CS);
+ writel(BCM2838_DMA40_END, memcpy_chan + BCM2838_DMA40_CS);
spin_unlock_irqrestore(&memcpy_lock, flags);
}
EXPORT_SYMBOL(bcm2838_dma40_memcpy);
static const struct of_device_id bcm2835_dma_of_match[] = {
- { .compatible = "brcm,bcm2835-dma", },
+ { .compatible = "brcm,bcm2835-dma", .data = &bcm2835_dma_cfg },
+ { .compatible = "brcm,bcm2838-dma", .data = &bcm2838_dma_cfg },
{},
};
MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match);
@@ -1001,6 +1185,8 @@ static int bcm2835_dma_probe(struct plat
int irq_flags;
uint32_t chans_available;
char chan_name[BCM2835_DMA_CHAN_NAME_SIZE];
+ const struct of_device_id *of_id;
+ int chan_count, chan_start, chan_end;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
@@ -1022,9 +1208,13 @@ static int bcm2835_dma_probe(struct plat
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
- rc = bcm_dmaman_probe(pdev, base, BCM2835_DMA_BULK_MASK);
- if (rc)
- dev_err(&pdev->dev, "Failed to initialize the legacy API\n");
+
+ /* The set of channels can be split across multiple instances. */
+ chan_start = ((u32)base / BCM2835_DMA_CHAN_SIZE) & 0xf;
+ base -= BCM2835_DMA_CHAN(chan_start);
+ chan_count = resource_size(res) / BCM2835_DMA_CHAN_SIZE;
+ chan_end = min(chan_start + chan_count,
+ BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED + 1);
od->base = base;
@@ -1054,6 +1244,14 @@ static int bcm2835_dma_probe(struct plat
platform_set_drvdata(pdev, od);
+ of_id = of_match_node(bcm2835_dma_of_match, pdev->dev.of_node);
+ if (!of_id) {
+ dev_err(&pdev->dev, "Failed to match compatible string\n");
+ return -EINVAL;
+ }
+
+ od->cfg_data = of_id->data;
+
/* Request DMA channel mask from device tree */
if (of_property_read_u32(pdev->dev.of_node,
"brcm,dma-channel-mask",
@@ -1063,18 +1261,34 @@ static int bcm2835_dma_probe(struct plat
goto err_no_dma;
}
- /* Channel 0 is used by the legacy API */
- chans_available &= ~BCM2835_DMA_BULK_MASK;
+ /* One channel is reserved for the legacy API */
+ if (chans_available & BCM2835_DMA_BULK_MASK) {
+ rc = bcm_dmaman_probe(pdev, base,
+ chans_available & BCM2835_DMA_BULK_MASK);
+ if (rc)
+ dev_err(&pdev->dev,
+ "Failed to initialize the legacy API\n");
+
+ chans_available &= ~BCM2835_DMA_BULK_MASK;
+ }
- /* We can't use channels 11-13 yet */
- chans_available &= ~(BIT(11) | BIT(12) | BIT(13));
+ /* And possibly one for the 40-bit DMA memcpy API */
+ if (chans_available & od->cfg_data->chan_40bit_mask &
+ BIT(BCM2838_DMA_MEMCPY_CHAN)) {
+ memcpy_parent = od;
+ memcpy_chan = BCM2835_DMA_CHANIO(base, BCM2838_DMA_MEMCPY_CHAN);
+ memcpy_scb = dma_alloc_coherent(memcpy_parent->ddev.dev,
+ sizeof(*memcpy_scb),
+ &memcpy_scb_dma, GFP_KERNEL);
+ if (!memcpy_scb)
+ dev_warn(&pdev->dev,
+ "Failed to allocated memcpy scb\n");
- /* Grab channel 14 for the 40-bit DMA memcpy */
- chans_available &= ~BIT(14);
- memcpy_chan = BCM2835_DMA_CHANIO(base, 14);
+ chans_available &= ~BIT(BCM2838_DMA_MEMCPY_CHAN);
+ }
/* get irqs for each channel that we support */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip masked out channels */
if (!(chans_available & (1 << i))) {
irq[i] = -1;
@@ -1097,13 +1311,17 @@ static int bcm2835_dma_probe(struct plat
irq[i] = platform_get_irq(pdev, i < 11 ? i : 11);
}
+ chan_count = 0;
+
/* get irqs for each channel */
- for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
+ for (i = chan_start; i < chan_end; i++) {
/* skip channels without irq */
if (irq[i] < 0)
continue;
/* check if there are other channels that also use this irq */
+ /* FIXME: This will fail if interrupts are shared across
+ instances */
irq_flags = 0;
for (j = 0; j <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; j++)
if ((i != j) && (irq[j] == irq[i])) {
@@ -1115,9 +1333,10 @@ static int bcm2835_dma_probe(struct plat
rc = bcm2835_dma_chan_init(od, i, irq[i], irq_flags);
if (rc)
goto err_no_dma;
+ chan_count++;
}
- dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i);
+ dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", chan_count);
/* Device-tree DMA controller registration */
rc = of_dma_controller_register(pdev->dev.of_node,
@@ -1149,6 +1368,13 @@ static int bcm2835_dma_remove(struct pla
bcm_dmaman_remove(pdev);
dma_async_device_unregister(&od->ddev);
+ if (memcpy_parent == od) {
+ dma_free_coherent(&pdev->dev, sizeof(*memcpy_scb), memcpy_scb,
+ memcpy_scb_dma);
+ memcpy_parent = NULL;
+ memcpy_scb = NULL;
+ memcpy_chan = NULL;
+ }
bcm2835_dma_free(od);
return 0;
--- a/drivers/pci/controller/pcie-brcmstb-bounce.c
+++ b/drivers/pci/controller/pcie-brcmstb-bounce.c
@@ -91,7 +91,7 @@ struct dmabounce_device_info {
static struct dmabounce_device_info *g_dmabounce_device_info;
-extern int bcm2838_dma40_memcpy_init(struct device *dev);
+extern int bcm2838_dma40_memcpy_init(void);
extern void bcm2838_dma40_memcpy(dma_addr_t dst, dma_addr_t src, size_t size);
#ifdef STATS
@@ -471,9 +471,9 @@ static const struct dma_map_ops dmabounc
.mapping_error = dmabounce_mapping_error,
};
-int brcm_pcie_bounce_register_dev(struct device *dev,
- unsigned long buffer_size,
- dma_addr_t threshold)
+int brcm_pcie_bounce_init(struct device *dev,
+ unsigned long buffer_size,
+ dma_addr_t threshold)
{
struct dmabounce_device_info *device_info;
int ret;
@@ -482,9 +482,9 @@ int brcm_pcie_bounce_register_dev(struct
if (g_dmabounce_device_info)
return -EBUSY;
- ret = bcm2838_dma40_memcpy_init(dev);
+ ret = bcm2838_dma40_memcpy_init();
if (ret)
- return ret;
+ return ret;
device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
if (!device_info) {
@@ -515,9 +515,8 @@ int brcm_pcie_bounce_register_dev(struct
device_create_file(dev, &dev_attr_dmabounce_stats));
g_dmabounce_device_info = device_info;
- set_dma_ops(dev, &dmabounce_ops);
- dev_info(dev, "dmabounce: registered device - %ld kB, threshold %pad\n",
+ dev_info(dev, "dmabounce: initialised - %ld kB, threshold %pad\n",
buffer_size / 1024, &threshold);
return 0;
@@ -526,14 +525,13 @@ int brcm_pcie_bounce_register_dev(struct
kfree(device_info);
return ret;
}
-EXPORT_SYMBOL(brcm_pcie_bounce_register_dev);
+EXPORT_SYMBOL(brcm_pcie_bounce_init);
-void brcm_pcie_bounce_unregister_dev(struct device *dev)
+void brcm_pcie_bounce_uninit(struct device *dev)
{
struct dmabounce_device_info *device_info = g_dmabounce_device_info;
g_dmabounce_device_info = NULL;
- set_dma_ops(dev, NULL);
if (!device_info) {
dev_warn(dev,
@@ -554,10 +552,16 @@ void brcm_pcie_bounce_unregister_dev(str
device_remove_file(dev, &dev_attr_dmabounce_stats));
kfree(device_info);
+}
+EXPORT_SYMBOL(brcm_pcie_bounce_uninit);
+
+int brcm_pcie_bounce_register_dev(struct device *dev)
+{
+ set_dma_ops(dev, &dmabounce_ops);
- dev_info(dev, "dmabounce: device unregistered\n");
+ return 0;
}
-EXPORT_SYMBOL(brcm_pcie_bounce_unregister_dev);
+EXPORT_SYMBOL(brcm_pcie_bounce_register_dev);
MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.org>");
MODULE_DESCRIPTION("Dedicate DMA bounce support for pcie-brcmstb");
--- a/drivers/pci/controller/pcie-brcmstb-bounce.h
+++ b/drivers/pci/controller/pcie-brcmstb-bounce.h
@@ -8,21 +8,26 @@
#ifdef CONFIG_ARM
-int brcm_pcie_bounce_register_dev(struct device *dev, unsigned long buffer_size,
- dma_addr_t threshold);
-
-int brcm_pcie_bounce_unregister_dev(struct device *dev);
+int brcm_pcie_bounce_init(struct device *dev, unsigned long buffer_size,
+ dma_addr_t threshold);
+int brcm_pcie_bounce_uninit(struct device *dev);
+int brcm_pcie_bounce_register_dev(struct device *dev);
#else
-static inline int brcm_pcie_bounce_register_dev(struct device *dev,
- unsigned long buffer_size,
- dma_addr_t threshold)
+static inline int brcm_pcie_bounce_init(struct device *dev,
+ unsigned long buffer_size,
+ dma_addr_t threshold)
+{
+ return 0;
+}
+
+static inline int brcm_pcie_bounce_uninit(struct device *dev)
{
return 0;
}
-static inline int brcm_pcie_bounce_unregister_dev(struct device *dev)
+static inline int brcm_pcie_bounce_register_dev(struct device *dev)
{
return 0;
}
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -650,6 +650,7 @@ static void brcm_set_dma_ops(struct devi
static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie,
unsigned int val);
+
static int brcmstb_platform_notifier(struct notifier_block *nb,
unsigned long event, void *__dev)
{
@@ -663,12 +664,11 @@ static int brcmstb_platform_notifier(str
strcmp(dev->kobj.name, rc_name)) {
int ret;
- ret = brcm_pcie_bounce_register_dev(dev, bounce_buffer,
- (dma_addr_t)bounce_threshold);
+ ret = brcm_pcie_bounce_register_dev(dev);
if (ret) {
dev_err(dev,
"brcm_pcie_bounce_register_dev() failed: %d\n",
- ret);
+ ret);
return ret;
}
}
@@ -681,8 +681,6 @@ static int brcmstb_platform_notifier(str
brcm_pcie_perst_set(g_pcie, 1);
msleep(100);
brcm_pcie_perst_set(g_pcie, 0);
- } else if (max_pfn > (bounce_threshold/PAGE_SIZE)) {
- brcm_pcie_bounce_unregister_dev(dev);
}
return NOTIFY_OK;
@@ -1718,6 +1716,7 @@ static int brcm_pcie_probe(struct platfo
void __iomem *base;
struct pci_host_bridge *bridge;
struct pci_bus *child;
+ extern unsigned long max_pfn;
bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
if (!bridge)
@@ -1753,6 +1752,20 @@ static int brcm_pcie_probe(struct platfo
if (IS_ERR(base))
return PTR_ERR(base);
+ /* To Do: Add hardware check if this ever gets fixed */
+ if (max_pfn > (bounce_threshold/PAGE_SIZE)) {
+ int ret;
+ ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer,
+ (dma_addr_t)bounce_threshold);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "could not init bounce buffers: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
pcie->clk = of_clk_get_by_name(dn, "sw_pcie");
if (IS_ERR(pcie->clk)) {
dev_warn(&pdev->dev, "could not get clock\n");
Reference in New Issue View Git Blame Copy Permalink