You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
180 lines
5.4 KiB
Diff
180 lines
5.4 KiB
Diff
From 5e1c00983efeca4522ac2e8574e3e3997d26a203 Mon Sep 17 00:00:00 2001
|
|
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
|
|
Date: Fri, 29 Apr 2016 12:17:21 -0400
|
|
Subject: [PATCH 074/102] mtd: mediatek: device tree docs for MTK Smart Device
|
|
Gen1 NAND
|
|
|
|
This patch adds documentation support for Smart Device Gen1 type of
|
|
NAND controllers.
|
|
|
|
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
|
|
---
|
|
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 161 ++++++++++++++++++++
|
|
1 file changed, 161 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
|
|
@@ -0,0 +1,161 @@
|
|
+MTK SoCs NAND FLASH controller (NFC) DT binding
|
|
+
|
|
+This file documents the device tree bindings for MTK SoCs NAND controllers.
|
|
+The functional split of the controller requires two drivers to operate:
|
|
+the nand controller interface driver and the ECC engine driver.
|
|
+
|
|
+The hardware description for both devices must be captured as device
|
|
+tree nodes.
|
|
+
|
|
+1) NFC NAND Controller Interface (NFI):
|
|
+=======================================
|
|
+
|
|
+The first part of NFC is NAND Controller Interface (NFI) HW.
|
|
+Required NFI properties:
|
|
+- compatible: Should be "mediatek,mtxxxx-nfc".
|
|
+- reg: Base physical address and size of NFI.
|
|
+- interrupts: Interrupts of NFI.
|
|
+- clocks: NFI required clocks.
|
|
+- clock-names: NFI clocks internal name.
|
|
+- status: Disabled default. Then set "okay" by platform.
|
|
+- ecc-engine: Required ECC Engine node.
|
|
+- #address-cells: NAND chip index, should be 1.
|
|
+- #size-cells: Should be 0.
|
|
+
|
|
+Example:
|
|
+
|
|
+ nandc: nfi@1100d000 {
|
|
+ compatible = "mediatek,mt2701-nfc";
|
|
+ reg = <0 0x1100d000 0 0x1000>;
|
|
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&pericfg CLK_PERI_NFI>,
|
|
+ <&pericfg CLK_PERI_NFI_PAD>;
|
|
+ clock-names = "nfi_clk", "pad_clk";
|
|
+ status = "disabled";
|
|
+ ecc-engine = <&bch>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ };
|
|
+
|
|
+Platform related properties, should be set in {platform_name}.dts:
|
|
+- children nodes: NAND chips.
|
|
+
|
|
+Children nodes properties:
|
|
+- reg: Chip Select Signal, default 0.
|
|
+ Set as reg = <0>, <1> when need 2 CS.
|
|
+Optional:
|
|
+- nand-on-flash-bbt: Store BBT on NAND Flash.
|
|
+- nand-ecc-mode: the NAND ecc mode (check driver for supported modes)
|
|
+- nand-ecc-step-size: Number of data bytes covered by a single ECC step.
|
|
+ The controller only supports 512 and 1024.
|
|
+ For large page NANDs ther recommended value is 1024.
|
|
+- nand-ecc-strength: Number of bits to correct per ECC step.
|
|
+ The valid values that the controller supports are: 4, 6,
|
|
+ 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 44,
|
|
+ 48, 52, 56, 60.
|
|
+ The strength should be calculated as follows:
|
|
+ E = (S - F) * 8 / 14
|
|
+ S = O / (P / Q)
|
|
+ E :nand-ecc-strength;
|
|
+ S :spare size per sector;
|
|
+ F : FDM size, should be in the range [1,8].
|
|
+ It is used to store free oob data.
|
|
+ O : oob size;
|
|
+ P : page size;
|
|
+ Q :nand-ecc-step-size
|
|
+ If the result does not match any one of the listed
|
|
+ choices above, please select the smaller valid value from
|
|
+ the list.
|
|
+ (otherwise the driver will do the clamping at runtime).
|
|
+- vmch-supply: NAND power supply.
|
|
+- pinctrl-names: Default NAND pin GPIO setting name.
|
|
+- pinctrl-0: GPIO setting node.
|
|
+
|
|
+Example:
|
|
+ &pio {
|
|
+ nand_pins_default: nanddefault {
|
|
+ pins_dat {
|
|
+ pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
|
|
+ <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
|
|
+ <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
|
|
+ <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
|
|
+ <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
|
|
+ <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
|
|
+ <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
|
|
+ <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
|
|
+ <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
|
|
+ input-enable;
|
|
+ drive-strength = <MTK_DRIVE_8mA>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+
|
|
+ pins_we {
|
|
+ pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
|
|
+ drive-strength = <MTK_DRIVE_8mA>;
|
|
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
|
|
+ };
|
|
+
|
|
+ pins_ale {
|
|
+ pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
|
|
+ drive-strength = <MTK_DRIVE_8mA>;
|
|
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ &nandc {
|
|
+ status = "okay";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&nand_pins_default>;
|
|
+ nand@0 {
|
|
+ reg = <0>;
|
|
+ nand-on-flash-bbt;
|
|
+ nand-ecc-mode = "hw";
|
|
+ nand-ecc-strength = <24>;
|
|
+ nand-ecc-step-size = <1024>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+NAND chip optional subnodes:
|
|
+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
|
|
+
|
|
+Example:
|
|
+ nand@0 {
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ preloader@0 {
|
|
+ label = "pl";
|
|
+ read-only;
|
|
+ reg = <0x00000000 0x00400000>;
|
|
+ };
|
|
+ android@0x00400000 {
|
|
+ label = "android";
|
|
+ reg = <0x00400000 0x12c00000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+2) ECC Engine:
|
|
+==============
|
|
+
|
|
+Required BCH properties:
|
|
+- compatible: Should be "mediatek,mtxxxx-ecc".
|
|
+- reg: Base physical address and size of ECC.
|
|
+- interrupts: Interrupts of ECC.
|
|
+- clocks: ECC required clocks.
|
|
+- clock-names: ECC clocks internal name.
|
|
+- status: Disabled default. Then set "okay" by platform.
|
|
+
|
|
+Example:
|
|
+
|
|
+ bch: ecc@1100e000 {
|
|
+ compatible = "mediatek,mt2701-ecc";
|
|
+ reg = <0 0x1100e000 0 0x1000>;
|
|
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
|
|
+ clocks = <&pericfg CLK_PERI_NFI_ECC>;
|
|
+ clock-names = "nfiecc_clk";
|
|
+ status = "disabled";
|
|
+ };
|