You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79/dts/qca9531_comfast_cf-wr752ac-...

134 lines
2.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
compatible = "comfast,cf-wr752ac-v1", "qca,qca9531";
model = "COMFAST CF-WR752AC v1";
aliases {
serial0 = &uart;
led-boot = &led_lan;
led-failsafe = &led_lan;
led-upgrade = &led_lan;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &pinmux_led_rssihigh &pinmux_led_rssilow>;
led_lan: lan {
label = "cf-wr752ac-v1:blue:lan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
rssihigh {
label = "cf-wr752ac-v1:green:rssihigh";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
rssilow {
label = "cf-wr752ac-v1:red:rssilow";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&pinmux {
pinmux_led_rssihigh: pinmux_led_rssihigh {
pinctrl-single,bits = <0xc 0x0 0xff000000>;
};
pinmux_led_rssilow: pinmux_led_rssilow {
pinctrl-single,bits = <0x8 0x0 0xff000000>;
};
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
art: partition@10000 {
label = "art";
reg = <0x010000 0x010000>;
read-only;
};
partition@20000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x020000 0xfd0000>;
};
partition@ff0000 {
label = "nvram";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <10>;
};