You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ep93xx/patches-2.6.39/001-ep93xx_cpuinfo.patch

60 lines
2.0 KiB
Diff

This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
This is necessary to be able to set a unique MAC address for DHCP purposes
by adding a line to /etc/network/interfaces:
# Generate a unique locally-assigned MAC address from the CPU serial number
pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
It uses the chip revision reading code in the ep93xx-chip-revision patch.
Really, this is wrong, since /proc/cpuinfo should report the revision and
serial number of the ARM920T processor, while these are the rev and serial
of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
/proc/socinfo for this information.
-martinwguy 14 May 2010
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -48,6 +48,12 @@
#include <asm/traps.h>
#include <asm/unwind.h>
+#if defined(CONFIG_ARCH_EP93XX)
+#include <mach/io.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
+#endif
+
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
#include "compat.h"
#endif
@@ -1005,9 +1011,16 @@ static int c_show(struct seq_file *m, vo
seq_puts(m, "\n");
seq_printf(m, "Hardware\t: %s\n", machine_name);
+#if defined(CONFIG_ARCH_EP93XX)
+ seq_printf(m, "Revision\t: %04x\n",
+ ep93xx_chip_revision());
+ seq_printf(m, "Serial\t\t: %016x\n",
+ *((unsigned int *)EP93XX_SECURITY_UNIQID));
+#else
seq_printf(m, "Revision\t: %04x\n", system_rev);
seq_printf(m, "Serial\t\t: %08x%08x\n",
system_serial_high, system_serial_low);
+#endif
return 0;
}
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -97,6 +97,8 @@
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))