openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Gabor Juhos 60dde219d4 ramips: do not stop the build if some targets fail This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238		12 years ago
docs	docs: update remaining references to functions.sh	12 years ago
include	kernel: update linux 3.7 to 3.7.3	12 years ago
package	ipv6-support: adapt UCI defaults to new ordering	12 years ago
scripts	remove support for ubicom32	12 years ago
target	ramips: do not stop the build if some targets fail	12 years ago
toolchain	gcc: fix build for MIPS64 targets introduced by musl patch	12 years ago
tools	adds support for Edimax BR-6524N	12 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	.gitignore: Ignore Emacs editor generated files	13 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	kernel: fix enabling coredump support on 3.7+	12 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	12 years ago
README	trying to make README file a bit more helpful	13 years ago
feeds.conf.default	Add xorg feed to feeds.conf.default	13 years ago
rules.mk	rules.mk: only select latest libgcc.a with wildcard match (#12798 )	12 years ago

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org