You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
219 lines
5.9 KiB
C
219 lines
5.9 KiB
C
/*
|
|
* OpenMesh OM5P support
|
|
*
|
|
* Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
|
|
* Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define OM5P_GPIO_LED_POWER 13
|
|
#define OM5P_GPIO_LED_GREEN 16
|
|
#define OM5P_GPIO_LED_RED 19
|
|
#define OM5P_GPIO_LED_YELLOW 17
|
|
#define OM5P_GPIO_LED_LAN 14
|
|
#define OM5P_GPIO_LED_WAN 15
|
|
#define OM5P_GPIO_BTN_RESET 4
|
|
#define OM5P_GPIO_I2C_SCL 20
|
|
#define OM5P_GPIO_I2C_SDA 21
|
|
|
|
#define OM5P_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define OM5P_KEYS_DEBOUNCE_INTERVAL (3 * OM5P_KEYS_POLL_INTERVAL)
|
|
|
|
#define OM5P_WMAC_CALDATA_OFFSET 0x1000
|
|
#define OM5P_PCI_CALDATA_OFFSET 0x5000
|
|
|
|
static struct gpio_led om5p_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "om5p:blue:power",
|
|
.gpio = OM5P_GPIO_LED_POWER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5p:red:wifi",
|
|
.gpio = OM5P_GPIO_LED_RED,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5p:yellow:wifi",
|
|
.gpio = OM5P_GPIO_LED_YELLOW,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5p:green:wifi",
|
|
.gpio = OM5P_GPIO_LED_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5p:blue:lan",
|
|
.gpio = OM5P_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5p:blue:wan",
|
|
.gpio = OM5P_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button om5p_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = OM5P_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data om5p_flash_data = {
|
|
.type = "mx25l12805d",
|
|
};
|
|
|
|
static void __init om5p_setup(void)
|
|
{
|
|
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
|
|
u8 mac[6];
|
|
|
|
/* make lan / wan leds software controllable */
|
|
ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_m25p80(&om5p_flash_data);
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
|
|
om5p_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(om5p_gpio_keys),
|
|
om5p_gpio_keys);
|
|
|
|
ath79_init_mac(mac, art, 2);
|
|
ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
|
|
|
|
/* GMAC0 is connected to the PHY0 of the internal switch */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = BIT(0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup);
|
|
|
|
static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = {
|
|
.sda_pin = OM5P_GPIO_I2C_SDA,
|
|
.scl_pin = OM5P_GPIO_I2C_SCL,
|
|
.udelay = 10,
|
|
.sda_is_open_drain = 1,
|
|
.scl_is_open_drain = 1,
|
|
};
|
|
|
|
static struct platform_device om5pan_i2c_device = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &om5pan_i2c_device_platdata,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("tmp423", 0x4c),
|
|
},
|
|
};
|
|
|
|
static struct at803x_platform_data om5p_an_at803x_data = {
|
|
.disable_smarteee = 1,
|
|
.enable_rgmii_rx_delay = 1,
|
|
.enable_rgmii_tx_delay = 1,
|
|
};
|
|
|
|
static struct mdio_board_info om5p_an_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 7,
|
|
.platform_data = &om5p_an_at803x_data,
|
|
},
|
|
};
|
|
|
|
static void __init om5p_an_setup(void)
|
|
{
|
|
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
|
|
u8 mac[6];
|
|
|
|
/* temperature sensor */
|
|
platform_device_register(&om5pan_i2c_device);
|
|
i2c_register_board_info(0, om5pan_i2c_devs,
|
|
ARRAY_SIZE(om5pan_i2c_devs));
|
|
|
|
/* make lan / wan leds software controllable */
|
|
ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_m25p80(&om5p_flash_data);
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
|
|
om5p_leds_gpio);
|
|
|
|
ath79_init_mac(mac, art, 0x02);
|
|
ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
|
ath79_setup_ar934x_eth_rx_delay(2, 2);
|
|
ath79_register_mdio(0, 0x0);
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
mdiobus_register_board_info(om5p_an_mdio0_info,
|
|
ARRAY_SIZE(om5p_an_mdio0_info));
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
|
|
|
|
/* GMAC0 is connected to the PHY7 */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_mask = BIT(7);
|
|
ath79_eth0_pll_data.pll_1000 = 0x02000000;
|
|
ath79_eth0_pll_data.pll_100 = 0x00000101;
|
|
ath79_eth0_pll_data.pll_10 = 0x00001313;
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_register_eth(1);
|
|
|
|
ath79_init_mac(mac, art, 0x10);
|
|
ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup);
|