You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
3930aab2cb
TP-Link WBS210 v2 is an outdoor wireless CPE for 2.4 GHz with two Ethernet ports based on Atheros AR9344 The device is the same as TP-Link CPE220 v2, but with higher TX power (27 dBm instead of 12 dBm) and two antenna connectors instead of built-in antennas. Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP: 192.168.0.100 Stock device TFTP adress: 192.168.0.254 The TP-Link WBS devices use the same GPIOs as the CPE devices, except for the link4 LED. For this one, WBS devices use "2", while CPE devices use "16". (Tested on WBS210 v2) Signed-off-by: Bernhard Geier <freifunk@geierb.de> [added comment about GPIO] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> |
5 years ago | |
|---|---|---|
| .. | ||
| base-files/etc/hotplug.d/ieee80211 | 5 years ago | |
| dts | 5 years ago | |
| files | 5 years ago | |
| generic | 5 years ago | |
| image | 5 years ago | |
| nand | 5 years ago | |
| patches-4.14 | 5 years ago | |
| patches-4.19 | 5 years ago | |
| tiny | 5 years ago | |
| Makefile | 5 years ago | |
| config-4.14 | 5 years ago | |
| config-4.19 | 5 years ago | |
| modules.mk | 6 years ago | |