You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
55e6c903ae
The GL.iNet GL-AR300M has been supported by the ar71xx and ath79 platforms with access to its 16 MB NOR flash, but not its 128 MB SPI NAND flash. This commit provides support for the NAND through the upstream SPI-NAND framework. Devices with both NOR and NAND flash can support independent firmware on each, with U-Boot able to boot from either. The OEM U-Boot will fall back to the NOR firmware after three "unsuccessful" boots. The family of GL-AR300M devices on the ath79 platform now includes: * glinet,gl-ar300m-lite "generic" target, NOR-only board * glinet,gl-ar300m-nand "nand" target * glinet,gl-ar300m-nor "nand" target (NAND-aware) NB: This commit increases the kernel size from 2 MB to 4 MB "Force-less" sysupgrade is presently supported from the current versions of following NOR-based firmwre images to the version of glinet,gl-ar300m-nor firmware produced by this commit: * gl-ar300m -- OEM v3 NOR ar71xx (openwrt-ar300m16-*.bin) * gl-ar300m -- OpenWrt 18.06 ar71xx * gl-ar300m -- OpenWrt 19.07 ar71xx Other upgrades to these images should be performed through U-Boot. The GL-AR300M OEM U-Boot allows upload and flashing of either NOR firmware (sysupgrade.bin) or NAND firmware (factory.img) through its HTTP-based GUI. Serial connectivity is not required. The glinet,gl-ar300m-nand and glinet,gl-ar300m-nor images generated after this commit should safely flash each other using sysupgrade. The boot counter is implemented by the OEM using u-boot-env. At this time, it does not appear that the switch on the side of the unit can be used to select NOR vs. NAND boot and the fail-over is only from NAND to NOR. To save flash wear, it is only reset when running the glinet,gl-ar300m-nand firmware. NAND-specific base-files are used to remove impact on existing generic and tiny targets. As there is now no "generic" build appropriate for the GL-AR300M16, (or for users of the GL-AR300M that do not need access to NAND) it will be introduced in a subsequent commit. Note: `mtd_get_mac_binary art 0x6` does not return the proper MAC and the GL.iNet source indicates that only the 0x0 offset is valid The ar71xx targets are unmodified. Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> |
5 years ago | |
|---|---|---|
| .. | ||
| apm821xx | 5 years ago | |
| ar7 | 5 years ago | |
| ar71xx | 5 years ago | |
| arc770 | 5 years ago | |
| archs38 | 5 years ago | |
| armvirt | 5 years ago | |
| at91 | 5 years ago | |
| ath25 | 5 years ago | |
| ath79 | 5 years ago | |
| bcm53xx | 5 years ago | |
| brcm47xx | 5 years ago | |
| brcm63xx | 5 years ago | |
| brcm2708 | 5 years ago | |
| cns3xxx | 5 years ago | |
| gemini | 5 years ago | |
| generic | 5 years ago | |
| imx6 | 5 years ago | |
| ipq40xx | 5 years ago | |
| ipq806x | 5 years ago | |
| ixp4xx | 5 years ago | |
| kirkwood | 5 years ago | |
| lantiq | 5 years ago | |
| layerscape | 5 years ago | |
| malta | 5 years ago | |
| mediatek | 5 years ago | |
| mpc85xx | 5 years ago | |
| mvebu | 5 years ago | |
| mxs | 5 years ago | |
| octeon | 5 years ago | |
| octeontx | 5 years ago | |
| omap | 5 years ago | |
| orion | 5 years ago | |
| oxnas | 5 years ago | |
| pistachio | 5 years ago | |
| ramips | 5 years ago | |
| rb532 | 5 years ago | |
| samsung | 5 years ago | |
| sunxi | 5 years ago | |
| tegra | 5 years ago | |
| uml | 5 years ago | |
| x86 | 5 years ago | |
| zynq | 5 years ago | |
| Makefile | ||