dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
13,715 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '513e8c583f'
${ noResults }
Go to file
Felix Fietkau 513e8c583f Several small fixes for ar8216 driver (patch by Jonas Gorski) 
* Create defines for some magic values/masks.

 * Change vlan_id to u16, to allow VIDs > 255.

 * Add a range check to set_pvid as it isn't a VID, but the index
   in the vlan table.

 * Set the max VID to 4094, since 4095 is a reserved value and
   should not be used.

 * In mangle_rx replace the provided VID with the VID of the table
   entry of the port, not the index of the table.

 * In hw_apply, remove a redundant emptyness check (was already
   checked several lines above).

 * In no vlan mode do not set the ingress mode to secure, as there
   are no vlan table entries, but to use the port's destination
   masks. Otherwise the switch won't forward anything.

 * In read_status tell that the phy is up (taken from the rtl8306
   driver).

SVN-Revision: 20083
 		14 years ago
docs Add documentation for passphrase option. 15 years ago
include The attached patch replaces $(1) install by $(if $(1), $(1), install) in the definition, in order to be able to specify an install rule, which is not always called install (example: trunk/package/ncurses/Makefile has rules called install.libs and install.data). 14 years ago
package dnsmasq: remove redundant code introduced with r20074 14 years ago
scripts ipkg: strip directory entries from package file list when offline installing .ipk archives, this prevents opkg from removing directories like /usr later on when trying to uninstall preinstalled packages (partial fix for #6772) 15 years ago
target Several small fixes for ar8216 driver (patch by Jonas Gorski) 14 years ago
toolchain uClibc: enhance debug support (closes: #6118) 14 years ago
tools mktplinkfw: fix help string, and remove duplicated option 14 years ago
.gitignore .gitignore: ignore vim swap files 15 years ago
BSDmakefile add missing copyright header 18 years ago
Config.in remove support for DEBUG_DIR, it has lost its purpose since STAGING_DIR_ROOT was added 15 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 15 years ago
README remove bison requirement (see [10398] & [14900]) 14 years ago
feeds.conf.default add a src-link example to feeds.conf.default 15 years ago
rules.mk there are quite a lot of package using ln -sf in their Makefile, so this patch adds 14 years ago

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org