You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Alex Maclean f683385e73 ramips: add support for TP-Link RE350
The TP-Link RE350 is a wall-wart AC1200 range extender/access point with
a single gigabit ethernet port and two non-detachable antennas, based on
the MT7621A SoC with MT7603E and MT7612E radios.

Firmware wise it is very similar to the QCA based RE450.

SoC: MediaTek MT7621A (880MHz)
Flash: 8MiB (Winbond W25Q64)
RAM:   64MiB (DDR2)
Ethernet: 1x 1Gbit
Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E)
LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act
(green)
Buttons: On/off, LED, reset, WPS

Serial header at J1, 57600 8n1:
Pin 1 TX
Pin 2 RX
Pin 3 GND
Pin 4 3.3V

Factory image can be uploaded directly through the stock UI.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
7 years ago
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 8 years ago
Makefile ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x) 7 years ago
mt7620.mk ramips: image: simplify TP-Link Archer devices definitions 7 years ago
mt7621.mk ramips: add support for TP-Link RE350 7 years ago
mt7628.mk ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 7 years ago
mt7688.mk ramips: Added Onion Omega2 and Omega2+ 7 years ago
rt288x.mk ramips: fix AR670W partition alignment 7 years ago
rt305x-legacy.mk ramips: use new image build code for more devices 8 years ago
rt305x.mk ramips: add support for TRENDnet TEW-638APB V2 7 years ago
rt3883.mk ramips: really drop the rt-n56u factory image 7 years ago