You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
4cd5ce5a7f
Increase the SPI frequency for the MT7620 based TP-Link Archer series to 30MHz. TP-Link uses different SPI flash chips for the same board revision, so be conservative to not break boards with a different chip. 30MHz should be well supported by all chips. Tested on Archer C2 v1 (GD25Q64B) and Archer C20i (W25Q64FV). Archer C20i (before) ==================== root@OpenWrt:~# time dd if=/dev/mtd1 of=/tmp/test.bin bs=64k 122+0 records in 122+0 records out real 0m 15.30s user 0m 0.00s sys 0m 15.29s Archer C20i (after) =================== root@OpenWrt:~# time dd if=/dev/mtd1 of=/tmp/test.bin bs=64k 122+0 records in 122+0 records out real 0m 5.99s user 0m 0.00s sys 0m 5.98s Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> |
4 years ago | |
|---|---|---|
| .github | 6 years ago | |
| config | 4 years ago | |
| include | 4 years ago | |
| package | 4 years ago | |
| scripts | 4 years ago | |
| target | 4 years ago | |
| toolchain | 4 years ago | |
| tools | 4 years ago | |
| .gitattributes | 12 years ago | |
| .gitignore | 4 years ago | |
| BSDmakefile | 17 years ago | |
| Config.in | 6 years ago | |
| LICENSE | 8 years ago | |
| Makefile | 4 years ago | |
| README | 5 years ago | |
| feeds.conf.default | 4 years ago | |
| rules.mk | 4 years ago | |
README
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org