You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
35 lines
1.2 KiB
Bash
35 lines
1.2 KiB
Bash
#!/bin/sh /etc/rc.common
|
|
#
|
|
# This script sets auto_recovery to "yes" and resets the boot counter to 0.
|
|
# As a golden rule, this should be the latest script to run at boot. For a
|
|
# developer snapshot, it is fine to set auto_recovery here. But for a stable
|
|
# release, this script must in fact turn off auto_recovery.
|
|
#
|
|
# Why? Because the custom sysupgrade script for the device will turn on
|
|
# auto_recovery to "yes". And it's the job of this script to set the
|
|
# boot boot_count to 0 and then disable auto_recovery, as that condition
|
|
# means that the stable release went well.
|
|
#
|
|
# I have to repeat: this script should be changed for stable releases.
|
|
|
|
START=99
|
|
boot() {
|
|
. /lib/functions.sh
|
|
|
|
case $(board_name) in
|
|
linksys,ea6350v3)
|
|
# make sure auto_recovery in uboot is always on
|
|
IS_AUTO_RECOVERY="$(fw_printenv -n auto_recovery)"
|
|
if [ "$IS_AUTO_RECOVERY" != "yes" ] ; then
|
|
fw_setenv auto_recovery yes
|
|
echo "Linksys EA6350v3: fw_setenv: auto_recovery has been set to yes"
|
|
fi
|
|
# reset the boot counter
|
|
fw_setenv boot_count 0
|
|
mtd resetbc s_env
|
|
echo "Linksys EA6350v3: boot counter has been reset"
|
|
echo "Linksys EA6350v3: boot_part=$(fw_printenv -n boot_part)"
|
|
;;
|
|
esac
|
|
}
|