You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/package/boot
Yanase Yuki 4a77a060ab ipq40xx: add support for Buffalo WTR-M2133HP
Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019.

Specification
-------------
- SoC: Qualcomm IPQ4019
- RAM: 512MiB
- Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC)
- Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch)
- Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch)
- Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch)
- Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN)
- LED: 4x white LED, 4x orange LED, 1x blue LED
- USB: 1x USB 3.0 port
- Input: 2x tactile switch, 2x slide switch (2x SP3T)
- Serial console: 115200bps, pinheader JP5 on PCB
- Power: DC 12V 2A

Flash instruction
-----------------
1. Set up a TFTP server (IP address: 192.168.11.10)
2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage"
   and put it into the TFTP server directory.
3. Connect the TFTP server and WTR-M2133HP.
4. Hold down the AOSS button, then power on the router.
5. After booting OpenWrt initramfs image, connect to the router by SSH.
6. Transfer "squashfs-nand-factory.ubi" to the router.
7. Execute the following commands.
    # ubidetach -p /dev/mtd15
    # ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi
    # fw_setenv bootcmd bootipq
8. Perform reboot.

Recover to stock firmware
-------------------------
1. Execute the following command.
    # fw_setenv bootcmd bootbf
2. Reboot and wait several minutes.

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
4 years ago
..
arm-trusted-firmware-mvebu packages/boot: bump arm-trusted-firmware-mvebu version 4 years ago
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: add new package 4 years ago
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Replace with official ARM version 6 years ago
at91bootstrap at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig 5 years ago
fconfig fconfig: cleanup Makefile 5 years ago
grub2 grub2: fix build when ASLR enabled 4 years ago
imx-bootlets treewide: clean up download hashes 8 years ago
kexec-tools x86: make crashdump works 4 years ago
kobs-ng kobs-ng: add header for integer definitions 7 years ago
tfa-layerscape layerscape: update tfa to LSDK-20.04 4 years ago
uboot-ar71xx uboot-ar71xx: fix musl host build 6 years ago
uboot-at91 uboot-at91: fix -Wformat-security 5 years ago
uboot-envtools ipq40xx: add support for Buffalo WTR-M2133HP 4 years ago
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 5 years ago
uboot-imx6 uboot-imx6: bump to 2020.04 release 4 years ago
uboot-kirkwood uboot-kirkwood: add support for Zyxel NSA310S 4 years ago
uboot-lantiq uboot-lantiq: fix compile with modern host dtc 6 years ago
uboot-layerscape layerscape: update u-boot to LSDK-20.04 4 years ago
uboot-mediatek mediatek: add uboot 4 years ago
uboot-mvebu mvebu: uDPU: switch default kernel and U-Boot PHY mode 4 years ago
uboot-mxs uboot-mxs: bump to v2020.04 4 years ago
uboot-omap omap: support booting off different mmc devices 5 years ago
uboot-oxnas uboot-oxnas: fix memory leak in tool mkox820crc 5 years ago
uboot-ramips ramips: add support for RAVPower RP-WD009 4 years ago
uboot-rockchip uboot-rockchip: fix ident string 4 years ago
uboot-sunxi uboot-sunxi: bump to 2020.04 relase 4 years ago
uboot-tegra tegra: add vendor string to device name 5 years ago
uboot-zynq uboot-zynq: update to 2019.07 5 years ago