You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/layerscape/patches-5.4/701-net-0387-net-phy-vsc851...

57 lines
1.9 KiB
Diff

From ebfedac745f6d747df2214e11a89ba44742b3def Mon Sep 17 00:00:00 2001
From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Fri, 27 Dec 2019 21:44:46 +0200
Subject: [PATCH] net: phy: vsc8514: enable in-band SGMII auto-negotiation
setting
The default in-band AN setting for the VSC8514 PHY is not very reliable:
its out-of-reset state is with SerDes AN disabled, but certain boot
firmware (such as U-Boot) enables it during the boot process.
So its final state as seen by Linux depends on whether the U-Boot PHY
driver has run or not.
If SGMII auto-negotiation is enabled but not acknowledged by the MAC,
the PHY does not pass traffic.
But otherwise, it is able to pass traffic both with AN disabled, and
with AN enabled.
We would like to make this explicitly configurable rather than hardcoded
as "on" as we are doing right now, but we'd rather hardcode it in LSDK
and wait until a solution lands upstream, than invent a solution for
this here.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/phy/mscc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -176,6 +176,8 @@ enum rgmii_rx_clock_delay {
#define SECURE_ON_PASSWD_LEN_4 0x4000
/* Extended Page 3 Registers */
+#define MSCC_PHY_SERDES_CON 16
+#define MSCC_PHY_SERDES_ANEG BIT(7)
#define MSCC_PHY_SERDES_TX_VALID_CNT 21
#define MSCC_PHY_SERDES_TX_CRC_ERR_CNT 22
#define MSCC_PHY_SERDES_RX_VALID_CNT 28
@@ -2131,6 +2133,14 @@ static int vsc8514_config_init(struct ph
mutex_unlock(&phydev->mdio.bus->mdio_lock);
+ ret = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_3);
+ if (ret)
+ return ret;
+
+ ret = phy_set_bits(phydev, MSCC_PHY_SERDES_CON, MSCC_PHY_SERDES_ANEG);
+ if (ret)
+ return ret;
+
ret = phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
if (ret)