openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Nicolas Thill 4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip) SVN-Revision: 16728		15 years ago
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	15 years ago
include	bump to 2.6.29.6 and refresh patches	15 years ago
package	fix wprobe-export	15 years ago
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	15 years ago
target	Add config file for 2.6.31 kernels in preparation for 2.6.31	15 years ago
toolchain	add a config option to select the binary stripping method to use (between none, strip & sstrip)	15 years ago
tools	fix segfault when using the maxlen argument (#4359 )	15 years ago
.gitignore	add logs/ to .gitignore	15 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	add a config option to select the binary stripping method to use (between none, strip & sstrip)	15 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	15 years ago
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	16 years ago
feeds.conf.default	switch to LuCI 0.9.x branch	15 years ago
rules.mk	add a config option to select the binary stripping method to use (between none, strip & sstrip)	15 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org