You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Steven Lin a736d912e2 ipq40xx: add support for EnGenius EAP2200
SOC:    IPQ4019 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB
FLASH:  NOR 4 MiB + NAND 128 MiB
ETH:    Qualcomm Atheros QCA8072
WLAN1:  Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4019 5GHz 802.11a/n/ac 2:2x2
WLAN2:  Qualcomm Atheros QCA9888 5GHz 802.11a/n/ac 2:2x2
INPUT:  WPS Button
LEDS:   Power, LAN1, LAN2, WLAN 2.4GHz, WLAN 5GHz-1, WLAN 5GHz-2, OPMODE

1. Load Ramdisk via U-Boot

To set up the flash memory environment, do the following:
a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters:
   * 115200bps
   * 8N1
b. Confirm that the PC is connected to the board using one of the Ethernet ports.
c. Set a static ip 192.168.99.8 for Ethernet that connects to board.
d. The PC must have a TFTP server launched and listening on the interface to which the board is connected.
e. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown.

U-BOOT> set serverip 192.168.99.9 && tftpboot 0x84000000 192.168.99.8:openwrt.itb && bootm

Signed-off-by: Steven Lin <steven.lin@senao.com>
[copied 4.19 dts to 5.4]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
4 years ago
..
qcom-ipq4018-a42.dts ipq40xx: dts: Unify naming of gpio-led nodes 5 years ago
qcom-ipq4018-ap120c-ac.dts ipq40xx: add ath10k-calibration-variant in AP120C-AC DTS 5 years ago
qcom-ipq4018-cs-w3-wd1200g-eup.dts ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP 4 years ago
qcom-ipq4018-dap-2610.dts ipq40xx: Add support for D-Link DAP-2610 4 years ago
qcom-ipq4018-ea6350v3.dts ipq40xx: ea6350v3: 4.19: enable pseudo rng support 5 years ago
qcom-ipq4018-eap1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 5 years ago
qcom-ipq4018-emd1.dts ipq40xx: add support for EnGenius EMD1 4 years ago
qcom-ipq4018-ens620ext.dts ipq40xx: Fix reboot on EnGenius ENS620EXT 5 years ago
qcom-ipq4018-ex61x0v2.dtsi ipq40xx: add label MAC address for Netgear EX6100v2/EX6150v2 5 years ago
qcom-ipq4018-ex6100v2.dts ipq40xx: remove qcom,ipq4019 on all devices 6 years ago
qcom-ipq4018-ex6150v2.dts ipq40xx: remove qcom,ipq4019 on all devices 6 years ago
qcom-ipq4018-fritzbox-4040.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4018-jalapeno.dts ipq40xx: use DTSI for Jalapeno 5 years ago
qcom-ipq4018-jalapeno.dtsi ipq40xx: use DTSI for Jalapeno 5 years ago
qcom-ipq4018-meshpoint-one.dts ipq40xx: add support for Crisis Innovation Lab MeshPoint.One 5 years ago
qcom-ipq4018-nbg6617.dts ipq40xx: convert to device-tree based USB LED trigger 6 years ago
qcom-ipq4018-rt-ac58u.dts ipq40xx: fix usbport trigger on the RT-AC58U with USB 2.0 devices 4 years ago
qcom-ipq4018-wre6606.dts ipq40xx: dts: Unify naming of gpio-led nodes 5 years ago
qcom-ipq4019-a62.dts ipq40xx: 4.19: fix pcie wifi unit-address of the MR33 and A62 5 years ago
qcom-ipq4019-ap.dk04.1-c1.dts ipq40xx: Add files for 4.19 6 years ago
qcom-ipq4019-ap.dk04.1.dtsi ipq40xx: 4.19: Enable pseudo random number generator 6 years ago
qcom-ipq4019-e2600ac-c1.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-e2600ac-c2.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-e2600ac.dtsi ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-ea8300.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-eap2200.dts ipq40xx: add support for EnGenius EAP2200 4 years ago
qcom-ipq4019-fritzbox-7530.dts ipq40xx: fix FRITZBox 7530 NAND controller node 5 years ago
qcom-ipq4019-fritzrepeater-1200.dts ipq40xx: add support for AVM FRITZ!Repeater 1200 5 years ago
qcom-ipq4019-fritzrepeater-3000.dts ipq40xx: add support for AVM FRITZ!Repeater 3000 5 years ago
qcom-ipq4019-map-ac2200.dts ipq40xx: limit frequencies for Asus Lyra 5 years ago
qcom-ipq4019-u4019-32m.dts ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-u4019.dtsi ipq40xx: build DEVICE_DTS based on SOC and device name 5 years ago
qcom-ipq4019-wpj419.dts ipq40xx: fix misplaced cells-sizes in WPJ419's dts 4 years ago
qcom-ipq4028-wpj428.dts ipq40xx: dts: Unify naming of gpio-led nodes 5 years ago
qcom-ipq4029-ap-303.dts ipq40xx: add support for Aruba AP-303 5 years ago
qcom-ipq4029-ap-303h.dts ipq40xx: add support for Aruba AP-303H 4 years ago
qcom-ipq4029-gl-b1300.dts ipq40xx: dts: Unify naming of gpio-led nodes 5 years ago
qcom-ipq4029-mr33.dts ipq40xx: 4.19: fix pcie wifi unit-address of the MR33 and A62 5 years ago