You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/package/boot
Tomasz Maciej Nowak 3a3d998c12 layerscape: resurrect support for FRDM-LS1012A
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.

0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"

Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
            µUSB 2.0 (debugging & power input)
            2x 3.5mm jack for microphone & headphone (SGTL5000)
            Arduino Shield expansion with I2C, SPI, UART, and GPIO
            JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)

Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.

Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.

As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
4 years ago
..
arm-trusted-firmware-mvebu packages/boot: bump arm-trusted-firmware-mvebu version 4 years ago
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Replace with official ARM version 5 years ago
at91bootstrap at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig 5 years ago
fconfig fconfig: cleanup Makefile 5 years ago
grub2 x86: add bootloader upgrade on sysupgrade 4 years ago
imx-bootlets treewide: clean up download hashes 8 years ago
kexec-tools treewide: Remove self from MAINTAINER entries 5 years ago
kobs-ng kobs-ng: add header for integer definitions 7 years ago
rbcfg rbcfg: make package available for ath79 4 years ago
tfa-layerscape layerscape: resurrect support for FRDM-LS1012A 4 years ago
uboot-ar71xx uboot-ar71xx: fix musl host build 5 years ago
uboot-at91 uboot-at91: fix -Wformat-security 5 years ago
uboot-envtools uboot-envtools: mxs: add support for olimex, imx23-olinuxino 4 years ago
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 5 years ago
uboot-imx6 uboot-imx6: bump to 2020.01 and refresh patches 4 years ago
uboot-kirkwood uboot-kirkwood: update to 2019.01 5 years ago
uboot-lantiq uboot-lantiq: fix compile with modern host dtc 6 years ago
uboot-layerscape layerscape: resurrect support for FRDM-LS1012A 4 years ago
uboot-mvebu uboot-mvebu: point to UBOOT_CONFIG when setting options 4 years ago
uboot-mxs uboot-mxs: bump to v2020.01 4 years ago
uboot-omap omap: support booting off different mmc devices 5 years ago
uboot-oxnas uboot-oxnas: fix memory leak in tool mkox820crc 4 years ago
uboot-sunxi sunxi: add support for FriendlyARM Nano PI NEO Air dev board 5 years ago
uboot-tegra tegra: add vendor string to device name 5 years ago
uboot-zynq uboot-zynq: update to 2019.07 5 years ago