You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/layerscape/patches-5.4/701-net-0314-staging-fsl_pp...

272 lines
7.7 KiB
Diff

From dff5fdd84a9ace2d9b8b56659c0855542829148a Mon Sep 17 00:00:00 2001
From: Calvin Johnson <calvin.johnson@nxp.com>
Date: Fri, 23 Nov 2018 23:58:28 +0530
Subject: [PATCH] staging: fsl_ppfe/eth: support single interface
initialization
- arrange members of struct mii_bus in sequence matching phy.h
- if mdio node is defined, use of_mdiobus_register to register
child nodes (phy devices) available on the mdio bus.
- remove of_phy_register_fixed_link from pfe_phy_init as it is being
handled in pfe_get_gemac_if_properties
- remove mdio enabled check
- skip phy init, if no PHY or fixed-link
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
---
drivers/staging/fsl_ppfe/pfe_eth.c | 110 +++++++++++++-----------
drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 4 +
2 files changed, 66 insertions(+), 48 deletions(-)
--- a/drivers/staging/fsl_ppfe/pfe_eth.c
+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
@@ -47,6 +47,7 @@
#define LS1012A_REV_1_0 0x87040010
+bool pfe_use_old_dts_phy;
bool pfe_errata_a010897;
static void *cbus_emac_base[3];
@@ -950,7 +951,8 @@ static int pfe_eth_mdio_init(struct pfe_
struct ls1012a_mdio_platform_data *minfo)
{
struct mii_bus *bus;
- int rc, ii;
+ struct device_node *mdio_node;
+ int rc = 0, ii;
struct phy_device *phydev;
netif_info(priv, drv, priv->ndev, "%s\n", __func__);
@@ -964,25 +966,30 @@ static int pfe_eth_mdio_init(struct pfe_
}
bus->name = "ls1012a MDIO Bus";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
+
+ bus->priv = priv;
bus->read = &pfe_eth_mdio_read;
bus->write = &pfe_eth_mdio_write;
bus->reset = &pfe_eth_mdio_reset;
- snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", priv->id);
- bus->priv = priv;
-
+ bus->parent = priv->pfe->dev;
bus->phy_mask = minfo->phy_mask;
- priv->mdc_div = minfo->mdc_div;
+ bus->irq[0] = minfo->irq[0];
+ priv->mdc_div = minfo->mdc_div;
if (!priv->mdc_div)
priv->mdc_div = 64;
-
- bus->irq[0] = minfo->irq[0];
-
- bus->parent = priv->pfe->dev;
-
netif_info(priv, drv, priv->ndev, "%s: mdc_div: %d, phy_mask: %x\n",
__func__, priv->mdc_div, bus->phy_mask);
- rc = mdiobus_register(bus);
+
+ mdio_node = of_get_child_by_name(priv->pfe->dev->of_node, "mdio");
+ if (mdio_node) {
+ rc = of_mdiobus_register(bus, mdio_node);
+ of_node_put(mdio_node);
+ } else {
+ rc = mdiobus_register(bus);
+ }
+
if (rc) {
netdev_err(priv->ndev, "mdiobus_register(%s) failed\n",
bus->name);
@@ -995,7 +1002,6 @@ static int pfe_eth_mdio_init(struct pfe_
* 3rd argument as true and then register the phy device
* via phy_device_register()
*/
-
if (priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) {
for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
phydev = get_phy_device(priv->mii_bus,
@@ -1268,8 +1274,6 @@ static int pfe_phy_init(struct net_devic
char phy_id[MII_BUS_ID_SIZE + 3];
char bus_id[MII_BUS_ID_SIZE];
phy_interface_t interface;
- struct device_node *phy_node;
- int rc;
priv->oldlink = 0;
priv->oldspeed = 0;
@@ -1278,7 +1282,6 @@ static int pfe_phy_init(struct net_devic
snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0);
snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->einfo->phy_id);
-
netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
interface = priv->einfo->mii_config;
if ((interface == PHY_INTERFACE_MODE_SGMII) ||
@@ -1301,23 +1304,22 @@ static int pfe_phy_init(struct net_devic
priv->oldduplex = -1;
pr_info("%s interface %x\n", __func__, interface);
- if (of_phy_is_fixed_link(priv->phy_node)) {
- rc = of_phy_register_fixed_link(priv->phy_node);
- if (rc)
- return rc;
- phy_node = of_node_get(priv->phy_node);
- phydev = of_phy_connect(ndev, phy_node, pfe_eth_adjust_link, 0,
+ if (priv->phy_node) {
+ phydev = of_phy_connect(ndev, priv->phy_node,
+ pfe_eth_adjust_link, 0,
priv->einfo->mii_config);
- of_node_put(phy_node);
+ if (!(phydev)) {
+ netdev_err(ndev, "Unable to connect to phy\n");
+ return -ENODEV;
+ }
} else {
phydev = phy_connect(ndev, phy_id,
&pfe_eth_adjust_link, interface);
- }
-
- if (IS_ERR(phydev)) {
- netdev_err(ndev, "phy_connect() failed\n");
- return PTR_ERR(phydev);
+ if (IS_ERR(phydev)) {
+ netdev_err(ndev, "Unable to connect to phy\n");
+ return PTR_ERR(phydev);
+ }
}
priv->phydev = phydev;
@@ -2411,13 +2413,10 @@ static int pfe_eth_init_one(struct pfe *
memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN);
/* Initialize mdio */
- if (minfo[id].enabled) {
- err = pfe_eth_mdio_init(priv, &minfo[id]);
- if (err) {
- netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n",
- __func__);
- goto err2;
- }
+ err = pfe_eth_mdio_init(priv, &minfo[id]);
+ if (err) {
+ netdev_err(ndev, "%s: pfe_eth_mdio_init() failed\n", __func__);
+ goto err1;
}
if (us)
@@ -2462,22 +2461,26 @@ static int pfe_eth_init_one(struct pfe *
HIF_RX_POLL_WEIGHT - 16);
err = register_netdev(ndev);
-
if (err) {
netdev_err(ndev, "register_netdev() failed\n");
- goto err3;
+ goto err2;
+ }
+
+ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
+ ((pfe_use_old_dts_phy) &&
+ (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
+ pr_info("%s: No PHY or fixed-link\n", __func__);
+ goto skip_phy_init;
}
phy_init:
device_init_wakeup(&ndev->dev, WAKE_MAGIC);
- if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) {
- err = pfe_phy_init(ndev);
- if (err) {
- netdev_err(ndev, "%s: pfe_phy_init() failed\n",
- __func__);
- goto err4;
- }
+ err = pfe_phy_init(ndev);
+ if (err) {
+ netdev_err(ndev, "%s: pfe_phy_init() failed\n",
+ __func__);
+ goto err3;
}
if (us) {
@@ -2488,6 +2491,7 @@ phy_init:
netif_carrier_on(ndev);
+skip_phy_init:
/* Create all the sysfs files */
if (pfe_eth_sysfs_init(ndev))
goto err4;
@@ -2496,13 +2500,16 @@ phy_init:
__func__, priv->EMAC_baseaddr);
return 0;
+
err4:
+ pfe_phy_exit(priv->ndev);
+err3:
if (us)
- goto err3;
+ goto err2;
unregister_netdev(ndev);
-err3:
- pfe_eth_mdio_exit(priv->mii_bus);
err2:
+ pfe_eth_mdio_exit(priv->mii_bus);
+err1:
free_netdev(priv->ndev);
err0:
return err;
@@ -2553,9 +2560,16 @@ static void pfe_eth_exit_one(struct pfe_
if (!us)
pfe_eth_sysfs_exit(priv->ndev);
- if (!(priv->einfo->phy_flags & GEMAC_NO_PHY))
- pfe_phy_exit(priv->ndev);
+ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
+ ((pfe_use_old_dts_phy) &&
+ (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
+ pr_info("%s: No PHY or fixed-link\n", __func__);
+ goto skip_phy_exit;
+ }
+
+ pfe_phy_exit(priv->ndev);
+skip_phy_exit:
if (!us)
unregister_netdev(priv->ndev);
--- a/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
@@ -18,6 +18,7 @@
#include "pfe_mod.h"
+extern bool pfe_use_old_dts_phy;
struct ls1012a_pfe_platform_data pfe_platform_data;
static int pfe_get_gemac_if_properties(struct device_node *parent, int port, int
@@ -64,8 +65,10 @@ static int pfe_get_gemac_if_properties(s
phy_node = of_parse_phandle(gem, "phy-handle", 0);
pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
if (phy_node) {
+ pfe_use_old_dts_phy = false;
goto process_phynode;
} else if (of_phy_is_fixed_link(gem)) {
+ pfe_use_old_dts_phy = false;
if (of_phy_register_fixed_link(gem) < 0) {
pr_err("broken fixed-link specification\n");
goto err;
@@ -73,6 +76,7 @@ static int pfe_get_gemac_if_properties(s
phy_node = of_node_get(gem);
pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
} else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) {
+ pfe_use_old_dts_phy = true;
/* Use old dts properties for phy handling */
addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);